building a 2.3 stroker

eclipse. galant. diamante. fto. lancer. 3000gt. mirage. etc...
sikblugsx
75% ricer
Posts: 222
Joined: October 08, 2005

November 04, 2006

bore is not the issue just why would you want to use a 100,000 mile bore and new pistons and there really is no kit it's just a 2.4 sonata crank in a 2.0 block that has been clearenced 2.0 rods and a piston that has the wrist pin moved
evodrivesme
100% ricer
Posts: 10
Joined: November 01, 2006

November 04, 2006

well i meen you can buy a kit from like http://www.slowboyracing.com to do it for like 1700 or something.
cimotorsports
Approved Vendor
Posts: 35
Joined: November 08, 2006
Location: Indiana, Pa
Contact:

January 12, 2007

We sell stroker kits.. they are basically a 100mm stroke crank (which if 6 bolt was taken from a sonota, 7 bolt from the 4G64 Soch engine.. utilizes stock rods, and a custom piston to ahcive the longer stroke.. these setups are good for making gobs of low end torque and def helps spool those larger tubos
Post Reply