stroker motors = god, turn that shit into a 427
| thejdm.com v6 [2026 rebirth] https://www.thejdm.com/forum/ Print view |
|
| what to do https://www.thejdm.com/forum/viewtopic.php?f=12&t=2361 |
Page 1 of 2 |
| Author: | ban [ October 29, 2004 ] |
| Post subject: | what to do |
i know this doesn't deal with hondas and inline fours but i'm puttin a 350 in my s-10. i ahve the motor already and i'm gonna rebuild it over the winter. now my question to all you car junkies is this. Should i rebuild the motor back to stock so shes a steady dependable driver with decent gas mileage or should i stroke her to a 383 with aluminum heads, edelbrock intake,and a 650 demon carb, etc... theres alot more that will go with these components but thats the jist of it. money is tight but don't let that be part of your decision. my truck is definately worth the swap. i'v shaved the tailgate and custom grille and more and repainted it. its lowered with springs shocks and blocks. i'll get pics up when i get them from my dads comp. |
|
| Author: | BRYCE [ November 24, 2004 ] |
| Post subject: | |
hah what kinda question is that, build that bitch up and then throw 2 turbos on it after that!! |
|
| Author: | munster [ November 24, 2004 ] |
| Post subject: | |
383. 'nuff said. |
|
| Author: | robry [ November 24, 2004 ] |
| Post subject: | |
stroker motors = god, turn that shit into a 427 |
|
| Author: | sfc [ November 25, 2004 ] |
| Post subject: | |
*shrug* what's the rest of the truck like? If you're going to throw in a stroker I hope you've already done your work on suspension/chassis stiffening/fat rubber to go with it, otherwise it'd be a waste and you should just stick with the plain 350. Also, I guess, do you have a second car as a daily driver? It's fun to have big horsepower toys but that's all they end up being is toys, at least most of the time, because you're always playing, and it's always breaking. |
|
| Author: | kotomile [ November 25, 2004 ] |
| Post subject: | |
Stock-rebuild the 350 and use any leftover money for a BODY DROP! |
|
| Author: | munster [ November 25, 2004 ] |
| Post subject: | |
Put her on her belly, tub it, and a 383. |
|
| Author: | Bangin HB [ November 26, 2004 ] |
| Post subject: | |
you realy need to take a trip to http://www.blazinlow.com , lots of helpful stuff over there with sbc swaps |
|
| Author: | ban [ December 08, 2004 ] |
| Post subject: | |
its been lowered 3/3. the front will drop aother inch with the v8 in it and i'm replaceing the rear blocks with lowerng leafs for a better ride. all the front bushings were replaced when i lowered it. once i finish it i'm gonna have my fun with it and sell it. i had another project underway before i started this one so i plan on finishing that. i'm just doin this to get more money out of it when i sell it. depending on cash flow this winter the stroker kit is definately possible |
|
| Author: | jay-six [ December 10, 2004 ] |
| Post subject: | |
yeah id do what he said... 350 is more than enough for that truck and it would look bad ass laying door on the ground... im putting a 305 in my mazda and body dropping it to the doors as soon as i find a real job now that im a college graduate |
|
| All times are UTC-04:00 | Page 1 of 2 |
|
Powered by phpBB® Forum Software © phpBB Limited |
|