someone on here did it with their integra... I believe red2teg or whatever his nick is, you should try pm'n him, or posting in the general forum so some other people who might not read this one can maybe help you out
| thejdm.com v6 [2026 rebirth] https://www.thejdm.com/forum/ Print view |
|
| 97ek4 auto to 5-spd swap https://www.thejdm.com/forum/viewtopic.php?f=14&t=2553 |
Page 1 of 2 |
| Author: | hondalowlow [ December 12, 2004 ] |
| Post subject: | 97ek4 auto to 5-spd swap |
i got a hydro D sires tranny.. hahah i need shift linkages shifter hydro lines and clutch resvior 3 pedal assembly for clutch pedal DO I NEED A 5 SPD ECU????????????????????? there are 2 wires coming out of the auto tranny thry are for the reverse lights... please fill me in on this swap i got the extra $ from x-mas cards and i wann get a 5-spd in ASAP! im sick of the auto tranny |
|
| Author: | hondalowlow [ December 13, 2004 ] |
| Post subject: | |
would someone please reply to this post and let me know what i all need... thnaks |
|
| Author: | just teg'n it [ December 13, 2004 ] |
| Post subject: | |
5spd ecu would be good yeah.. i know for a B series you need it.. from auto to manual the auto ecu would be going through more data i would assume for shift points etc.. that's all i can help you with. |
|
| Author: | sfc [ December 13, 2004 ] |
| Post subject: | |
someone on here did it with their integra... I believe red2teg or whatever his nick is, you should try pm'n him, or posting in the general forum so some other people who might not read this one can maybe help you out |
|
| Author: | fltblkteg [ December 13, 2004 ] |
| Post subject: | |
you shouldn't need a different ecu you'll just eliminate some wires |
|
| Author: | munster [ December 13, 2004 ] |
| Post subject: | |
I think you might need a 5spd ecu. I'll check it out. PM redg2integra |
|
| Author: | munster [ December 13, 2004 ] |
| Post subject: | |
You do need the ecu. There's a bunch of sensors in the auto tranny. You'll throw a cel. Here's the parts list(taken from honda-tech):
Check these links too. http://honda-tech.com/zerothread?id=550221 http://honda-tech.com/zerothread?id=946332 http://honda-tech.com/zerothread?id=930084 http://honda-tech.com/zerothread?id=829202 |
|
| Author: | fltblkteg [ December 13, 2004 ] |
| Post subject: | |
but technically you don't need the ecu for it to run come on munster it's jude he never does it the right way just as long as it runs |
|
| Author: | munster [ December 13, 2004 ] |
| Post subject: | |
haha. CELs are cool. |
|
| Author: | hondalowlow [ December 15, 2004 ] |
| Post subject: | |
common don... my ef is sold and blew up... my ek is gonna be done right and its has been for everything i did to it.. i got the $ now and i dont do shit half ass no more.... the 91 was a mess i agree.. but the 97 is gonna be nice trust me... but thanks for the help guys... don i need shift linkages... i got a clutch assy and lines tranny , mounts, brake pedal , i need ecu and shift linkages... i got flywheel from a ef and a clutch from a ef.. its d-sires so they should work... i hope...  . |
|
| All times are UTC-04:00 | Page 1 of 2 |
|
Powered by phpBB® Forum Software © phpBB Limited |
|