thanks guys, i'll keep you posted...
| thejdm.com v6 [2026 rebirth] https://www.thejdm.com/forum/ Print view |
|
| Side Markers... https://www.thejdm.com/forum/viewtopic.php?f=14&t=2651 |
Page 1 of 1 |
| Author: | The_Civic [ January 01, 2005 ] |
| Post subject: | Side Markers... |
hey guys, just wondering if anyone has a template to install side markers on an EK and on an rsx... any help would be great... thanks in advance... |
|
| Author: | munster [ January 02, 2005 ] |
| Post subject: | |
Let me dig around. I forget where I got the template to do mine. |
|
| Author: | munster [ January 02, 2005 ] |
| Post subject: | |
Here's the link that I used: http://www.goosse.streetracing.org/photo4.html Good luck |
|
| Author: | .saint [ January 02, 2005 ] |
| Post subject: | |
same one i used. |
|
| Author: | The_Civic [ January 02, 2005 ] |
| Post subject: | |
thanks guys, i'm gonna be putting mine in next week... i'm sooo nervous... wish me luck... oh and by the way, anyone have the rsx template? thanks again... |
|
| Author: | .saint [ January 02, 2005 ] |
| Post subject: | |
make sure when you do it lay it out on the car and use making tape around the edges of the templae when you cut. if not u will get a ton of lil steel pieces scratching the shit out of your paint.. also after you cut it out. use touch up paint or some tyle pf paint/silicone over the exposed steel. if not any type of water that touches that exposed steel it will rust quick. |
|
| Author: | munster [ January 02, 2005 ] |
| Post subject: | |
I agree with jawn. That's what we both did. Mask and tape off most of the fender and lay the template on top of it. Cut a little bit, check for fitment, cut a little more, etc. Better to cut too little. You won't have to force the sidemarker in either. It'll just pop in nice and smooth. It also wouldn't hurt if when you lay the template on the paper/tape lay a level on top of the line to make sure that the sidemarker will be level. Good luck. I'm sure you'll be fine. It's gut-wrenching when you start cutting. |
|
| Author: | The_Civic [ January 03, 2005 ] |
| Post subject: | |
thanks guys, i'll keep you posted... |
|
| Author: | JaySmith [ January 04, 2005 ] |
| Post subject: | |
Same template I used, thanks to Goose for making it for me along long time ago. haha |
|
| All times are UTC-04:00 | Page 1 of 1 |
|
Powered by phpBB® Forum Software © phpBB Limited |
|