thejdm.com v6 [2026 rebirth]
https://www.thejdm.com/forum/
Print view

h2b in my hatch..
https://www.thejdm.com/forum/viewtopic.php?f=14&t=5891
Page 1 of 1
Author:  jdmcivic98 [ March 17, 2006 ]
Post subject:  h2b in my hatch..

well its time to throw out the h22 tranny and put in the b-series tranny. wish me luck i will need it. i want 12's on a stock bottom end and stock head damm it! wil take pics of the install.
Author:  .saint [ March 17, 2006 ]
Post subject: 

good luck... btw.. 1st post.. welcome to the site! introduce yourself in the noobs forum!
Author:  Jezek [ March 18, 2006 ]
Post subject: 

I want to see this.....should be sick. If I was going N/A I woulda thought of doing it.....
Author:  hondalowlow [ March 18, 2006 ]
Post subject: 

Jezek wrote:I want to see this.....should be sick. If I was going N/A I woulda thought of doing it.....
so you can put a B series tranny on a H series block.. im lost here !?!?!?!?
Author:  Jezek [ March 19, 2006 ]
Post subject: 

hondalowlow wrote:
Jezek wrote:I want to see this.....should be sick. If I was going N/A I woulda thought of doing it.....
so you can put a B series tranny on a H series block.. im lost here !?!?!?!?
You can buy an adaptor plate to put a B series tranny onto a H series engine.

It's been out for a while, but it takes some fab. work to get it to fit....you have to use certain mounts and parts, etc....and the plate itself is about a G....
Author:  jdmcivic98 [ March 22, 2006 ]
Post subject: 

u need mounts , axles, clutch and flywheel, some other stuff as well should be fun. i am going to post some pics of it with the h22 and then the after with the b-series trans.
Author:  hondalowlow [ March 24, 2006 ]
Post subject: 

"You can buy an adaptor plate to put a B series tranny onto a H series engine.

It's been out for a while, but it takes some fab. work to get it to fit....you have to use certain mounts and parts, etc....and the plate itself is about a G...."

souds like a waste of $
Author:  munster [ March 25, 2006 ]
Post subject: 

hondalowlow wrote:
souds like a waste of $
No way. B trannies > H trannies. I actually thought about doing an H few years ago and I was going to do the same. No more cables. Solid linkage. Plus then you are open to so many options on transmissions. H series don't hold up as well.
Author:  ef8 mcm [ March 25, 2006 ]
Post subject: 

MUNSTER HIT IT ON THE HEAD!
All times are UTC-04:00 Page 1 of 1