| thejdm.com v6 [2026 rebirth] https://www.thejdm.com/forum/ Print view |
|
| just wandering https://www.thejdm.com/forum/viewtopic.php?f=15&t=6252 |
Page 1 of 1 |
| Author: | race2win502 [ May 15, 2006 ] |
| Post subject: | just wandering |
dose any body know for a fact or if a dc exhaust would fit on a eg coupe. im pretty sure it would but would like some more input on it. |
|
| Author: | CarbonEG6 [ May 16, 2006 ] |
| Post subject: | |
I dont think it would be a perfect fit. Reason why is because if it did the exhaust that are made for EG's and DC's would be listed as the same. There will be some modifying needed. |
|
| Author: | munster [ May 16, 2006 ] |
| Post subject: | |
The flange up front goes a different direction. I don't know about length. Might have to cut some off of the DC exhaust. |
|
| Author: | vtecdood [ May 16, 2006 ] |
| Post subject: | Re: just wandering |
the dc2 exhaust is a little shorter i know this because i have a dc2 3" exhaust on my coupe right now and the muffler sits back in maybe 3-4 inches enough that i had to cut my bumper a bit because it was melting my bumper so i made a sheetmetal piece but i like it more becaue it is tucked away and is more stealth like. |
|
| Author: | race2win502 [ May 17, 2006 ] |
| Post subject: | |
i was looking to get the buddyclub spec II exh and i can only seem to find it for the dc, i saw it on a eg hatch and it stuck out like 4ish inches from the bumper and if its the same on the dcs the i may just fit like a glove. we'll just have to see or reserch it more, but thanx guys much help |
|
| Author: | memphis240drift [ May 17, 2006 ] |
| Post subject: | |
don't put on an exhaust that sticks out 4-5 inches from the bumber.... nobody wants to see that |
|
| Author: | race2win502 [ May 17, 2006 ] |
| Post subject: | |
no im not but if the dc exh is sorter than than the coupes it'll work out posably idk |
|
| Author: | vtecdood [ May 23, 2006 ] |
| Post subject: | |
http://www.tunerzine.com/articles.php?id=102 scroll down to the galleryt and here you can see different angles of my car showing the 3" thermal exhaust meant for a dc2 |
|
| All times are UTC-04:00 | Page 1 of 1 |
|
Powered by phpBB® Forum Software © phpBB Limited |
|