thejdm.com v6 [2026 rebirth]
https://www.thejdm.com/forum/
Print view

90-93 integra radiator install
https://www.thejdm.com/forum/viewtopic.php?f=16&t=1048		 Page 1 of 1
Author:  Nikku [ December 29, 2003 ]
Post subject:  90-93 integra radiator install
the pix below will explain it all, the only thing necessary to have is a 88-91 CRX Si driver side radiator mount bracket (the top one, it is shaped like a triangle).....on a related note, the radiator sits perfectly w/ no possibility of air in the head (which can be caused if the upper port of the radiator sits too high above the head).....enjoy

stock
Image integ unit
Image nice new fan that flows ALOT more CFM then stock and can be had for about $60 at your local autozone, that one is a HAYDEN fan
Image installed
Image another install shot
Image side install shot, notice how straight the upper coolant hose is (IE not angled up and down)
Image bay shot
Image all legal baby
Image
Author:  g2JDMteg [ December 29, 2003 ]
Post subject: 
wow that fits nicely, what are you using for you upper rad. hose?
Author:  Nikku [ December 29, 2003 ]
Post subject: 
g2JDMteg wrote:wow that fits nicely, what are you using for you upper rad. hose?

that is a piece of flex hose from kragen....works well and does not swell nearly as much as the OEM hose, works really good w/ the spoon radiator cap
All times are UTC-04:00 Page 1 of 1

Powered by phpBB® Forum Software © phpBB Limited