for you frankenstein guys

Post by **Nikku** » December 24, 2003

check this out, hope it helps

http://www.theoldone.com/articles/badtothebone/

Post by **BRYCE** » January 21, 2004

Well if i ever want to build a Cr/vtec I will read that page.

Merilious · Post by **Merilious** » January 21, 2004

Nice page, alot of info.

Post by **kotomile** » January 21, 2004

That's a VERY thorough (sp?) build!

munster · Post by **munster** » December 03, 2004

I like the flow of the write-up.

we built this motor. I was stupid and wanted more rpms...I blew it up. I found a new block. Acid was eating it.

At least he told the truth about the build up. Didn't try to make it look like they threw it together in a night.

4.114ej6 · Post by **4.114ej6** » December 04, 2004

Excellent write up, thou i was hoping they installed aftermarket sleeves instead of the stock b20 sleeves, they are not high RPMs friendly. The hone on the cylinders are excellent. Reminds me of my last 12.3:1 lsvtec buildup; Over all, Job well done!

Here is the link with my previous buildup if anyone is interested...

http://www.angelfire.com/fl5/revline/allrspec.htm