thejdm.com v6 [2026 rebirth]
https://www.thejdm.com/forum/
Print view

rear bracket and driver side mount
https://www.thejdm.com/forum/viewtopic.php?f=17&t=2869		 Page 1 of 1
Author:  phatboi [ January 28, 2005 ]
Post subject:  rear bracket and driver side mount
alritez i just got the rear bracket from an si the L bracket. but i couldnt find a driver side mount. and some guy that i know he said that the stock driver side mount would wit the swap that im getting and i dont need the driver side mount from an si can any one confirm that?

thanks danny
Author:  munster [ January 28, 2005 ]
Post subject: 
What motor in what chassis?

If you're talking about an EK...I needed both the 99-00 Si rear mount (The L mount) and the cast iron part of the drivers side mount (attaches to the block). The Si and stock look very similar, but if you put them beside one another you can see that the Si is angled differently.

Each mount is about $50 from a dealership.
Author:  phatboi [ January 28, 2005 ]
Post subject: 
yeah its a b18 that is going in to my ek thanks to ill probably go to the dealers today to find out a price
Author:  munster [ January 28, 2005 ]
Post subject: 
I can find you the Honda part numbers if you want.

The first time that I ordered mine they screwed up and tried to give me a V6 Accord mount.
Author:  munster [ January 29, 2005 ]
Post subject: 
Image You need #7 and the bracket that has "a 5-20" listed beside it, but you just need that bracket. You can reuse the studs from your EK along with the other parts.

http://www.hondaautomotiveparts.com/aut ... 29+%284%29

Print that page and take it to the dealership.
Author:  phatboi [ January 29, 2005 ]
Post subject: 
good stuff thanks alot haha
All times are UTC-04:00 Page 1 of 1

Powered by phpBB® Forum Software © phpBB Limited