cx axles.
will that matter? why would the passenger side go in, but the drivers wouldnt.
i hate life
| thejdm.com v6 [2026 rebirth] https://www.thejdm.com/forum/ Print view |
|
| why wont my axle go in :( ??? https://www.thejdm.com/forum/viewtopic.php?f=17&t=4181 |
Page 1 of 1 |
| Author: | _drew [ June 28, 2005 ] |
| Post subject: | why wont my axle go in :( ??? |
car is a 92 dx hatch. Motor is from a 95 cx. passenger axle went in fine, smooth like butta. drivers axle goes in motor side just fine, but wont fit through the hub/spindle side. it seems like its too large, gets about 1/10th of the way in, and just flat out stops. tried a ton of wd40, motor oil, penetrating oil.. you name it to lube it up, but that little bitch wont go in. all the ''threads'' look fine, nothing is chewed up on either the hub/spindle or the end of the axle.... help ??? |
|
| Author: | popeye [ June 28, 2005 ] |
| Post subject: | |
which axles are you using DX or CX?? |
|
| Author: | _drew [ June 28, 2005 ] |
| Post subject: | |
cx axles. will that matter? why would the passenger side go in, but the drivers wouldnt. i hate life |
|
| Author: | TRAVASS [ June 28, 2005 ] |
| Post subject: | |
hit that bitch with a rubber mallet and a 2x4! always wrked on mine! sorry if thats no help! |
|
| Author: | kha [ June 29, 2005 ] |
| Post subject: | |
sweet talk your tranny first |
|
| Author: | Hercules [ June 29, 2005 ] |
| Post subject: | |
lol just make that sucker go in...try a different d-series axle if you can get one and see if that will work. if not there has to be somthing interfering in your hub or somthin. or just try cleanin out the spines real good too, good luck man |
|
| Author: | miyagi [ June 30, 2005 ] |
| Post subject: | |
clean out the spines really well, and just force the fucker in there - they're a pain in the ass sometimes ... especially on an older car..... but it'll go. a deadblow hammer and some sheer force will do the trick ..... and sweet talking your tranny and caressing it in the right spots doesn't hurt either. Good luck! |
|
| Author: | .saint [ July 02, 2005 ] |
| Post subject: | |
yeah maybe lube up your finger and slip it in the hole a lil. talk dirty get that hole wet should slip in a lil maybe use some force show the hole who's boss around there. |
|
| All times are UTC-04:00 | Page 1 of 1 |
|
Powered by phpBB® Forum Software © phpBB Limited |
|