| thejdm.com v6 [2026 rebirth] https://www.thejdm.com/forum/ Print view |
|
| single bolt clutch resevoir bracket. https://www.thejdm.com/forum/viewtopic.php?f=17&t=6340 |
Page 1 of 1 |
| Author: | .saint [ May 30, 2006 ] |
| Post subject: | single bolt clutch resevoir bracket. |
if you look at eks, egs, dc's and such u will all notice on the clutch resevoir there is a bracket holding it.. well that bracket is held with 2 10mm bolts... what model honda has the single bolt res. bracket? if ya can help thanks  *edit* 
thats the oe one im talking about that came in the EGs and EKs and such.. i seen a single bolt one once i was wondering what model they are from... i will try and find a pic of what im talking about. |
|
| Author: | Sean @ NDF [ May 31, 2006 ] |
| Post subject: | |
si's have two...not sure about anything else. maybe some old civics/accords had single. Why? |
|
| Author: | .saint [ May 31, 2006 ] |
| Post subject: | |
well i talked to the guy i seen who had the 'single bolt' and he made it custom from his bracket.. so it looks like im going to be doing some grinding. |
|
| Author: | Sean @ NDF [ May 31, 2006 ] |
| Post subject: | |
just get a two bolt one, and cut down the middle of the two bolts - then you could roll a new lip if you wanted to to make it match the other side. SHouldnt be too hard... but why? just for cleanliness? |
|
| Author: | .saint [ May 31, 2006 ] |
| Post subject: | |
yeah. cleaning it up a bit. |
|
| Author: | Yellow Wagon [ May 31, 2006 ] |
| Post subject: | |
get ride of the bolts altogether and weld it in place. Now THATS clean. |
|
| All times are UTC-04:00 | Page 1 of 1 |
|
Powered by phpBB® Forum Software © phpBB Limited |
|