| thejdm.com v6 [2026 rebirth] https://www.thejdm.com/forum/ Print view |
|
| GSR oil cooler onto LS? https://www.thejdm.com/forum/viewtopic.php?f=17&t=9507 |
Page 1 of 1 |
| Author: | Teaks92HB [ January 15, 2008 ] |
| Post subject: | GSR oil cooler onto LS? |
k, I'm not sure how to do it but i know it can be done. i would like to take the oil cooler on my useless GSR block and apply it to my LS block. But I'm not quite sure how to run the lines for it. anyone have any ideas? Thanks |
|
| Author: | Nikku [ January 15, 2008 ] |
| Post subject: | |
http://hybrid.honda-perf.org/tech/oilcooler/index.html shammo. |
|
| Author: | Teaks92HB [ January 16, 2008 ] |
| Post subject: | |
very nice write up, and thank you, but i was curious about the stock oil cooler? does anyone know what i'm talking about? |
|
| Author: | Nikku [ January 16, 2008 ] |
| Post subject: | |
i would say try running the lines as they did in that link, obviously ignoring their external filtration system. would that work? |
|
| Author: | fabricator [ February 10, 2008 ] |
| Post subject: | |
If I remember correctly the factory oil cooler will bolt to the LS block...you might want to use the water tube from the GSR if you still have it...it has the extra nipples for the cooler. if not you will need to just tap in a feed and return line for the coolant. |
|
| Author: | Teaks92HB [ February 10, 2008 ] |
| Post subject: | |
yup i have all that stuff. sounds good thanks a ton man! i'm glad you know what i meant!! |
|
| Author: | fabricator [ February 12, 2008 ] |
| Post subject: | |
No problem man....glad i could help. |
|
| All times are UTC-04:00 | Page 1 of 1 |
|
Powered by phpBB® Forum Software © phpBB Limited |
|