| thejdm.com v6 [2026 rebirth] https://www.thejdm.com/forum/ Print view |
|
| Axel Nut Wont come off!! Turned to cant get hub off axel!! https://www.thejdm.com/forum/viewtopic.php?f=20&t=2256 |
Page 1 of 3 |
| Author: | BRYCE [ October 03, 2004 ] |
| Post subject: | Axel Nut Wont come off!! Turned to cant get hub off axel!! |
Ya so today i was trying to put in my skunks 2 studs, and i get the caliper off and the rotor off, no problem. but then i try to take the big nut off the center of the hub and it wouldnt move a tic. Any Suggestions how to get it off?? I had a huge breaker bar on it, with me standing on that, jumping up and down... Help y0 |
|
| Author: | tenchu [ October 03, 2004 ] |
| Post subject: | |
PB Blaster? |
|
| Author: | munster [ October 03, 2004 ] |
| Post subject: | |
They're rough. That's just one of those things you have to work at and curse at. You have the right idea, though. Can't go wrong with a huge breaker bar.It helps if you put something through the studs to hold everything still. |
|
| Author: | .saint [ October 03, 2004 ] |
| Post subject: | |
dont forget to pound out the little insert. look inside there is a lil piece of metal from the threads pounded out into a little cutout in the nut make sure you bend/pound that back. |
|
| Author: | BRYCE [ October 03, 2004 ] |
| Post subject: | |
Fuck i was putting so much damn tension on it! I dont think even an impact gun could get that bitch off! I had a crow bar wedge between the studs so that bitch wasnt moving!! ARRGGHH i am gonna lace that bitch with everything i have WD, PB, Break Fluid... John i dont know what you are talking about.. |
|
| Author: | .saint [ October 03, 2004 ] |
| Post subject: | |
haha yeah my explaination is a lil shitty. uhm.. tommorrow i can take some pics if my cam wants to work. im trying to think how to word it a lil better to understand. |
|
| Author: | BRYCE [ October 03, 2004 ] |
| Post subject: | |
ya that would be dope thanks y0 |
|
| Author: | munster [ October 04, 2004 ] |
| Post subject: | |
Jawn's talking about the little part of the nut that is pinched down into the groove. You have to get a straight screwdriver and pound it out before that nut will turn. |
|
| Author: | BRYCE [ October 04, 2004 ] |
| Post subject: | |
roger |
|
| Author: | BRYCE [ October 04, 2004 ] |
| Post subject: | |
ya so i stole a huge breaker bar from work tonight and some PB and WD so hopefully i will be getting that B I T C H off tommrow |
|
| All times are UTC-04:00 | Page 1 of 3 |
|
Powered by phpBB® Forum Software © phpBB Limited |
|