anyone ever run this setup? i like the idea of how it all ties together.
good/bads? about this setup?
found this pic on honda-tech. picture of the entire srr rear setup along w/the srr lca's that im ordering my next paycheck.
| thejdm.com v6 [2026 rebirth] https://www.thejdm.com/forum/ Print view |
|
| srr lower tie and sway bars. https://www.thejdm.com/forum/viewtopic.php?f=20&t=366 |
Page 1 of 1 |
| Author: | .saint [ August 20, 2003 ] |
| Post subject: | srr lower tie and sway bars. |
anyone ever run this setup? i like the idea of how it all ties together. good/bads? about this setup? found this pic on honda-tech. picture of the entire srr rear setup along w/the srr lca's that im ordering my next paycheck. |
|
| Author: | nineight [ August 20, 2003 ] |
| Post subject: | |
i'll be using srr lca's and progressive lower sway bar with a beak's reinforcement kit |
|
| Author: | .saint [ September 14, 2003 ] |
| Post subject: | |
only drawback i reaseached about the srr sway bar is its 19mm instead of 22mm like skunk2 and other companies. but i like the fact that it all ties together and really tightens up the rear end. the lowercontrol arms were made for the sway setup so no drilling is needed. colors seem a bit tacky but just seeing the whol setup under the rear of the car is spectacular. comptech makes a combo like this one but i couldnt see spending 500+ on the rear setup when i paid 405 shipped for lca's, tie and sway combo. couldnt beat that price. |
|
| Author: | ej8 chico [ September 15, 2003 ] |
| Post subject: | |
you suck donkey balls kid. |
|
| Author: | jay99ek [ October 02, 2003 ] |
| Post subject: | |
i have the SRR rear LCA's.. going to be getting the TEIN Flex w/ EDFC dampening controller along with the Comptech rear sway/tie bar combo.. pretty stiff suspension.. currently looking for lighter steering knuckles for the front.. don't want to lighten up the rear too much.. rather shave off weight on the front than the rear.. but i've got to admit.. the SRR's look nice..  |
|
| Author: | munster [ October 03, 2003 ] |
| Post subject: | |
I want to go with the SRR rear setup and a jimfab front. |
|
| Author: | .saint [ October 03, 2003 ] |
| Post subject: | |
yup. jim fab will be in front of mine also. with carbing bars on top |
|
| Author: | munster [ October 03, 2003 ] |
| Post subject: | |
skunk2 on top of mine. |
|
| Author: | levin [ October 04, 2003 ] |
| Post subject: | |
carbing powa  |
|
| All times are UTC-04:00 | Page 1 of 1 |
|
Powered by phpBB® Forum Software © phpBB Limited |
|