and you should well know that the integra suspenion is the same as civic suspension, what are you having problems with on it? it is the actual removal/install process? or what? be more specific so i can get you what you need sucka duck
| thejdm.com v6 [2026 rebirth] https://www.thejdm.com/forum/ Print view |
|
| 99-00 civic coupe Koni/GC install write up? https://www.thejdm.com/forum/viewtopic.php?f=20&t=4997 |
Page 1 of 2 |
| Author: | Sean @ NDF [ November 02, 2005 ] |
| Post subject: | 99-00 civic coupe Koni/GC install write up? |
I cant find one anywhere...even on honda-tech. Any body know of one? |
|
| Author: | kotomile [ November 02, 2005 ] |
| Post subject: | |
99-00 is a fairly straightforward install isn't it? |
|
| Author: | idreamidrive [ November 03, 2005 ] |
| Post subject: | |
shouldn't they be on the inside of your packaging? |
|
| Author: | Sean @ NDF [ November 03, 2005 ] |
| Post subject: | |
koni instructions are HOrrIBLE! and the GC didn't even come with instructions. Yes koto, its pretty much a simple install. I just want to make sure I don't forget anything, and/or put things in the wrong spot. I've installed full coilovers, and shock/spring combo's, but never a shock/sleeve. |
|
| Author: | Nikku [ November 03, 2005 ] |
| Post subject: | |
http://www.honda-tech.com/zerothread?id=1416178 http://www.honda-tech.com/zerothread?id=1330796 http://www.honda-tech.com/zerothread?id=1212527 i pwn j00 |
|
| Author: | Nikku [ November 03, 2005 ] |
| Post subject: | |
http://www.honda-tech.com/zerothread?id=891136 again |
|
| Author: | Sean @ NDF [ November 03, 2005 ] |
| Post subject: | |
I've seen all of those threads so NO you dont pwn anyone. Those are integras homie.... eh, it doesnt matter, I'll figure it out... |
|
| Author: | Nikku [ November 03, 2005 ] |
| Post subject: | |
and you should well know that the integra suspenion is the same as civic suspension, what are you having problems with on it? it is the actual removal/install process? or what? be more specific so i can get you what you need sucka duck |
|
| Author: | Sean @ NDF [ November 03, 2005 ] |
| Post subject: | |
what parts are needed and what arent. The Koni's come with hardware to install springs....you wont use the spring perch or the clipring for coilover sleeves... and where the fuck the other shit goes on the top hat |
|
| Author: | Nikku [ November 03, 2005 ] |
| Post subject: | |
you my friend need to look closer at the last link i posted, it shows you EXACTLY what to do with the perches, etc |
|
| All times are UTC-04:00 | Page 1 of 2 |
|
Powered by phpBB® Forum Software © phpBB Limited |
|