| thejdm.com v6 [2026 rebirth] https://www.thejdm.com/forum/ Print view |
|
| Longer sub-frame bolts. https://www.thejdm.com/forum/viewtopic.php?f=20&t=7098 |
Page 1 of 1 |
| Author: | boostjunkie95 [ September 13, 2006 ] |
| Post subject: | Longer sub-frame bolts. |
I need some longer bolts, the ones that connect the LCA's to the subframe on an EG, anyone know where I can get them? I have a lower tie bar and the stock bolts are not long enough to thread into the subframe with the bar installed. Any help is appriciated. |
|
| Author: | Sean @ NDF [ September 13, 2006 ] |
| Post subject: | |
home depot? |
|
| Author: | Bart-EK [ September 13, 2006 ] |
| Post subject: | |
Aren't the outer ones longer than the inner ones? or was it the other way around? don't remember... even after fucking with them for hours last saturday... You can get OEM ones from some parts car than.. |
|
| Author: | kotomile [ September 13, 2006 ] |
| Post subject: | |
Any hardware store, just take in the old one and match the threads up, then buy a longer version. |
|
| Author: | phunhaus [ September 13, 2006 ] |
| Post subject: | |
Contact Chalreston from A-Spec-Racing and see if you can buy some from him. He includes them with his ASR Subframe Reinforcement kits. |
|
| Author: | boostjunkie95 [ September 15, 2006 ] |
| Post subject: | |
I talked to Charleston at ASR, he had them on stock. They are on the way. Thanks again for the help guys. |
|
| All times are UTC-04:00 | Page 1 of 1 |
|
Powered by phpBB® Forum Software © phpBB Limited |
|