I will put 5 mm width wheel spacers on my Honda Civic VTi 1996.
Do I need extended wheel studs or are stock OK?
| thejdm.com v6 [2026 rebirth] https://www.thejdm.com/forum/ Print view |
|
| Extended wheel studs https://www.thejdm.com/forum/viewtopic.php?f=20&t=9124 |
Page 1 of 1 |
| Author: | Ninja [ September 17, 2007 ] |
| Post subject: | Extended wheel studs |
I will put 5 mm width wheel spacers on my Honda Civic VTi 1996. Do I need extended wheel studs or are stock OK? |
|
| Author: | xtel [ October 05, 2007 ] |
| Post subject: | |
With 5mm you should be fine, but for safety purposes I would get some extended studs. It's all preference. |
|
| Author: | *CACKYWHEELS [ January 02, 2008 ] |
| Post subject: | |
You don't need new studs until you're at 15MM but most people like to run extended studs or even run spacers with the studs already pressed in that go over your existing ones.. Even when it comes to extended studs you could run OEM Acura TL studs as they are just as long as the ARP studs, but a ton cheaper.. Just in case you wanted to get a quick cheap "fix" |
|
| All times are UTC-04:00 | Page 1 of 1 |
|
Powered by phpBB® Forum Software © phpBB Limited |
|