| thejdm.com v6 [2026 rebirth] https://www.thejdm.com/forum/ Print view |
|
| anyone else have a problem similar? https://www.thejdm.com/forum/viewtopic.php?f=20&t=9766 |
Page 1 of 1 |
| Author: | Teaks92HB [ March 26, 2008 ] |
| Post subject: | anyone else have a problem similar? |
put springs on my car, front is tucked and rear is skyjacker high. i'm 99.99% sure that the front is on the front and the rear is on the rear... anyone? |
|
| Author: | .saint [ March 26, 2008 ] |
| Post subject: | |
whats the spring rates? sometimes the weight of the motor reallt puts that front end down. |
|
| Author: | boostjunkie95 [ March 26, 2008 ] |
| Post subject: | |
If your springs arent backwards, are your LCA's upside down in the rear? |
|
| Author: | Zero [ March 27, 2008 ] |
| Post subject: | |
or you just put the wrong springs in the wrong places... the longer spring doesnt mean it goes in the front... then again i dont know what your working with so thats the only thing i could think of.. |
|
| Author: | jdm delivery [ March 27, 2008 ] |
| Post subject: | |
i think the closer the rungs of the springs are the more weight it should hold ie: it should be on the front. the ones with more space should be on the back |
|
| Author: | Colin [ March 27, 2008 ] |
| Post subject: | |
thats not always true, on my ep3 the front springs are really wide, and only are wound a few times. on the back they are wound a lot tighter, and smaller. |
|
| Author: | Teaks92HB [ March 27, 2008 ] |
| Post subject: | |
well its official! i'm retarded. and yes they were backwards. lol my fronts were in the rear and rear's were in the front. . so i'm 99.99% sure i'm an ass.. but i thank you guys for trying to help me. and now that they are on right it sits pretty good. i'll be running my LS rim's with 205-50-15 falkens. so i really can not wait to put a bigger motor in.. hopefully i'll get some pics soon |
|
| All times are UTC-04:00 | Page 1 of 1 |
|
Powered by phpBB® Forum Software © phpBB Limited |
|