thejdm.com v6 [2026 rebirth]
https://www.thejdm.com/forum/
Print view

dsm injectors
https://www.thejdm.com/forum/viewtopic.php?f=21&t=4487		 Page 1 of 1
Author:  kaoticimports [ August 17, 2005 ]
Post subject:  dsm injectors
i was wondering why dsm 450 injectors will no seat down into the intake mani.i have an h22 and it comes stock with 345cc injectors.well when i put the 450cc in they didnt seat with that o ring in the intake mani that came with the 345's.
Author:  tenchu [ August 17, 2005 ]
Post subject: 
I believe one of the o rings is too big and you have to shave it. I forgot which one. lol
Author:  Sohchonda5221 [ January 10, 2006 ]
Post subject: 
what about the resistors do u need them also? i need help asap to get mine workin where can i get them resistors and what do i ask for...? will the injectors not work with out them resistors?
Author:  Doctor H Mcm [ July 24, 2006 ]
Post subject: 
never had a problem fitting them in i have an h22...i know they work fine in b16s with afc tune... no injector resistors because they dont have them.....i put 450s in on stock computer idled fine wont start or run withe the injector resistor unpluged...but under boost it broke up...may of had the fmu hooked up still...but i didnt care because my car runs ok with 8psi and stock injectors.....rc750 injectors and a ems tune is what im working on
Author:  Doctor H Mcm [ August 11, 2006 ]
Post subject: 
just ran evo 8 injectors 560 with fmu unpluged ran rich at 15psi aem uego was at 10 for afr vehicle broke up at 1/2 throttle ..... car was runing to rich...i am going to use them with the aem ems ..... so i swap with dsm 450s and the h22a is doing good i recomened a afc if your not going to do a stand alone ems... dsm parts on honda kick ass...
Author:  Doctor H Mcm [ August 12, 2006 ]
Post subject: 
13.30 at 109mph 10psi with dsm 450s very consistant....stock ecu no fmu
All times are UTC-04:00 Page 1 of 1

Powered by phpBB® Forum Software © phpBB Limited