| thejdm.com v6 [2026 rebirth] https://www.thejdm.com/forum/ Print view |
|
| legend rotors and nsx calipers https://www.thejdm.com/forum/viewtopic.php?f=21&t=4881 |
Page 1 of 1 |
| Author: | 1bar_ek [ October 12, 2005 ] |
| Post subject: | legend rotors and nsx calipers |
I have a 98 civic dx hatchback, with a built gsr motor + t3/to4e, and I want more stopping power. I know the dx rotors are small, and i want to upgrade for bigger. I don't really want to spend a lot of money for the aftermarket ones. I was wondering if the acura legend rotors and nsx calipers would work instead?? |
|
| Author: | Nikku [ October 12, 2005 ] |
| Post subject: | Re: legend rotors and nsx calipers |
why not 5 lug ITR conversion? |
|
| Author: | munster [ October 12, 2005 ] |
| Post subject: | |
I just got a set of 92-95 rears and have GSR fronts. I plan on doing stainless lines, slotted rotors, etc. Do you road race or drag? I have heard of people doing NSX calipers, but I don't know what's involved in the install. |
|
| Author: | 1bar_ek [ October 13, 2005 ] |
| Post subject: | |
It's for my street car. It's my daily driver and I have over 300+ hp, so I just want more stopping power. |
|
| Author: | Nikku [ October 13, 2005 ] |
| Post subject: | |
type r 5 lug w/ NSX calipers...... |
|
| Author: | tenchu [ October 13, 2005 ] |
| Post subject: | |
I believe you have to run 17's with NSX calipers, keep that in mind, thats why I want to do GSR's. |
|
| Author: | Nikku [ October 13, 2005 ] |
| Post subject: | |
i think its 16's, i will have to verify that, but it would certainly also depend on the wheel design |
|
| Author: | phan [ March 15, 2006 ] |
| Post subject: | |
gsr front/rear, good pads, rotors, ss lines, upgraded b.booster, m/c, and GOOD TIRES will be plenty. |
|
| Author: | g3teg97 [ March 23, 2006 ] |
| Post subject: | |
Does anyone know about installing the NSX calipers? |
|
| All times are UTC-04:00 | Page 1 of 1 |
|
Powered by phpBB® Forum Software © phpBB Limited |
|