I have a Golden Eagle sleeved type-R short block and crank
84.5mm bore, cylinders 1 and 2 are scrored, needs to be bored to 85mm.
IMO it should be used for all-motor at that bore so it's no good to me.
Make offer
| thejdm.com v6 [2026 rebirth] https://www.thejdm.com/forum/ Print view |
|
| GE sleeved B18C5 shortblock and crank https://www.thejdm.com/forum/viewtopic.php?f=22&t=2581 |
Page 1 of 1 |
| Author: | urbanracer2000 [ December 15, 2004 ] |
| Post subject: | GE sleeved B18C5 shortblock and crank |
I have a Golden Eagle sleeved type-R short block and crank 84.5mm bore, cylinders 1 and 2 are scrored, needs to be bored to 85mm. IMO it should be used for all-motor at that bore so it's no good to me. Make offer |
|
| All times are UTC-04:00 | Page 1 of 1 |
|
Powered by phpBB® Forum Software © phpBB Limited |
|