thejdm.com v6 [2026 rebirth]
https://www.thejdm.com/forum/
Print view

[*fs*] Tons of stuff! GSR, JDM, forced induction, & MORE
https://www.thejdm.com/forum/viewtopic.php?f=22&t=6304		 Page 1 of 3
Author:  miyagi [ May 25, 2006 ]
Post subject:  [*fs*] Tons of stuff! GSR, JDM, forced induction, & MORE
Alright guys - i've got a ton of stuff for sale. I'm not listing prices for anything, it's all best reasonable offer .. if all you're going to do is lowball me, then don't bother... i know what this stuff goes for and so do you, so let's end the bullshit :thumbup:

YES - I am paypal verified and this is also the method of payment that i preferred.

I'm located in the Altoona, PA area (45 min from State College, 1.5 hours from Pittsburgh)

Local pickup is preferred on the bigger items, but i'll ship at the buyer's expense.

I'll be adding pics of EVERYTHING this weekend, so check back

Alright, here's my stuff ... buy it PLEASE!!!

Endyn Alternator Stepper Pulley for Jackson Racing Supercharger
fits DOHC supercharged applications

Hawk HPS brake pads (front/rear)
BRAND NEW IN BOX. Fits 94+ GSR for sure and probably some others as well

Brembo Blank Rotors (front/rear)
BRAND NEW IN BOX. Fits 94+ GSR for sure and probably some others as well

Garrett T3/T04e 57 trim .63 a/r
Excellent condition. Roughly 1,500 miles on turbo. This is the standard full race stage 1, peakboost kit, etc turbo. Made 409 whp 283 ft/lbs tq at 16 psi on pump gas on a 84mm B16 ~10:1 c/r

85mm Golden Eagle Sleeved B16 shortblock w/ polished crank
The motor is getting ready to go to the machine shop now to get taken to 85.. comes with no oil pan or oil pan tapped for oil return, your choice. Can include Eagle H beam rods for additional cost

Eagle H Beam Rods
used, but excellent condition. B16

Hondata S300
Already in OBD1 GSR ECU, comes with software and cable

3" GReddy Power Extreme 2 cat back exhaust
94+ 2 door integra, used but in good condition. Muffler is a bit smaller than turbo N1.

3" Stainless test pipe
length of stock gsr cat. converter

Omni Power Front and Rear Camber Kit
BRAND NEW IN BOX, includes sticker :thumbup:, Civic, Del Sol, Integra

Supertech valvesprings
used for under 1000 miles. I believe 75 lb seat pressure, taken to 9300 with no problem. DOHC VTEC

Portflow retainers
used for under 1000 miles. I believe 75 lb seat pressure, taken to 9300 with no problem. DOHC VTEC

95 GSR cams
sold as set only

98 spec JDM ITR/ CTR Intake Cam
used

Buddy Club adjustable cam gears
Gold, Used, DOHC VTEC

Sparco Sprint Bucket Seat
Black, non adjusable, Excellent condition

Sparco Torino Reclinable Seat
Black w/ Grey, good condition

OEM JDM EK4 Yellow square foglights w/ harness and switch
Excellent condition, used for 1 week, never wired up, take off to fit intercooler piping in bumper :P

VIS (i think) Carbon Fiber front lip
Used, scratched on bottom, one chip on corner. 94+ JDM ITR front end

99/00 Red/Clear tail lights
coupe, excellent condition

84mm headgasket
DOHC VTEC, stock thickness, if i can find it

12:1 Vortech FMU
used[/o]

Missing Link
used

THREE Wiseco 84.5mm 10.5:1 c/r pistons
Pulled 180 on a compression test in each cylinder (w/ thick headgasket). Rings still in perfect condition. Buy these 3, and i'll throw in the detonated 4th one for free :P

95 GSR head.
75,000 miles. May or may not be salvagable. I'll post detailed pics soon. No cams, no springs, no retainers .... everything else (cam caps, all bolts, etc)

Alright guys - that's all I got. PM me if you're interested in something. Like i said, i'm in PA and would rather the big stuff be picked up... I am able to drive to meet someone if it's within reason (we can talk about that in PM. Someone please buy my stuff!!! I need to get my car running!

Things I'm looking for
running GSR long block w/ obd1 ECU
running LS long block w/ obd1 ECU
running B20 Longblock w/ obd1 ECU
and anything else of interest.... but i need my car to run ... so bolt ons, etc i will not need

:ip: :up: :up:
Author:  munster [ May 25, 2006 ]
Post subject: 
:up: Good luck with the sale.
Author:  Jezek [ May 25, 2006 ]
Post subject: 
good shit...good luck bump
Author:  30stones [ May 25, 2006 ]
Post subject: 
Bump cuz this fool needs money and this stuff is legit...some of this stuff is mine so buy up :P
Author:  crxls [ May 27, 2006 ]
Post subject:  Re: FS: Tons of stuff! GSR, JDM, forced induction, Spoon, MO
mr_miyagi wrote: Garrett T3/T04e 57 trim .63 a/r
Excellent condition. Roughly 1,500 miles on turbo. This is the standard full race stage 1, peakboost kit, etc turbo. Made 409 whp 283 ft/lbs tq at 16 psi on pump gas on a 84mm B16 ~10:1 c/r



:ip: :up: :up:
im interested in this ---^^^ but have no idea what to offer. bottom line, how much do you want for it?
Author:  miyagi [ May 27, 2006 ]
Post subject: 
they go for roughly 635 shipped from cheapturbo.com... make me an offer and we'll go from there. I'll take some pics of it today.

I also have an RLD-FAB Equal Length/Ramhorn manifold, tial 38 mm wastegate with dumptube, 3" downpipe, etc, etc if you're interested :up:

Since you're somewhat close, I can drive and meet you somewhere so we don't have to dick with shipping
Author:  .saint [ May 27, 2006 ]
Post subject: 
SPOON carbon kevlar plug wire cover
OEM JDM Civic Type R N1 Crank pulley

sold :P
Author:  miyagi [ May 27, 2006 ]
Post subject: 
.saint wrote:SPOON carbon kevlar plug wire cover
OEM JDM Civic Type R N1 Crank pulley

sold :P
yea - he's right, it is sold. Too bad i couldn't find someone straight to buy the stuff though, i usually don't sell stuff to queers :kiss:
Author:  .saint [ May 27, 2006 ]
Post subject: 
u didnt complain at carlsile when i had u bent over the bathtub and u were singing my chemical romance while i was delivering the dong to your rusty sheriff's badge.
Author:  miyagi [ May 27, 2006 ]
Post subject: 
:love:
All times are UTC-04:00 Page 1 of 3

Powered by phpBB® Forum Software © phpBB Limited