thejdm.com v6 [2026 rebirth]
https://www.thejdm.com/forum/
Print view

*FS* Complete D16Y8 with Bottom-end built LOTS OF PICS
https://www.thejdm.com/forum/viewtopic.php?f=22&t=9765
Page 1 of 1
Author:  Highway-Star [ March 26, 2008 ]
Post subject:  *FS* Complete D16Y8 with Bottom-end built LOTS OF PICS

D16Y8 bottom-end built for BOOST!
First things first, I am in NO rush at all to sell this. I dont want any lowball prices, and I dont even need to get rid of this. I'm only going to sell this if it goes for the right price. Later on if I get a lot of people wanting the internals and such, I will part the motor out. But for now..looking to sell the whole thing together.

And yes, folks, this is an ENTIRE SWAP. Comes with everything to get this bitch in your car. Me and my crew built the bottom end from scratch.

Mod list (whats included):
D16Y8 complete motor with:
Rebuilt block, re-honed cylinder walls
75mm 8.5:1 YCP (Vitara) pistons w/ free floating pins
Speed-o-motive forged H-beam rods with ARP bolts
ARP head studs
ACL bearings
Hastings rings
NRG plugs
Iridium 10.5mm blue spark plug wires
D16Y5 tranny (grinds a tad in 2nd, but all other gears are fine)

The extras:
Shift linkages
Energy Suspension shifter bushings
OBX red radiator hoses
D16Y5 ECU

The motor has about 600 Boosted miles on it, and 2500 N/A miles. Runs strong!


The motor was broken in properly, does not smoke at ALL. Leaks some oil..but can be fixed. I have a new motor going in, so I don't need this. But again..I WILL keep this motor as long as it takes till it sells for the right price. Thanks!

On to the pics: Image Image Image Image Image Image Image Image Image Image Image Image Image And heres a quick shot of the wires. Image So there we have it! If this doesnt sell complete, I might part it out. But we'll see...

I'm thinking 900$ OR BEST OFFER. No reasonable offers refused. Any hardcore lowballing will be ignored.

Thanks,
Greyson

PM me, post here, or email.

[email protected]

:up:

Oh...and that price OBVIOUSLY does not include shipping..I would like to sell local CO..
I will ship, but it will kill you.

BEWARE. :o
Author:  miyagi [ March 26, 2008 ]
Post subject: 

:up: good luck mang
Author:  Highway-Star [ March 26, 2008 ]
Post subject: 

Thanks much :up:
Author:  Secret Squirrel [ March 26, 2008 ]
Post subject: 

part it out...and i buy stuff.




SS
Author:  Highway-Star [ March 26, 2008 ]
Post subject: 

Well as said before..I want to try and sell complete. But if I do part it, what do you want?
Author:  Highway-Star [ April 03, 2008 ]
Post subject: 

BUMP. Will part out now. These prices do NOT include shipping.

D16Y8 complete head other than IACV - 150$
-Comes with 10.5mm Vision iridium wires, plugged onto Iridium spark plugs
-Complete Valvetrain, never dissassembled
-120k miles on the head

D16Y8 built block (complete) - 500$
-Speed-o-motive forged H-beam rods with ARP rod bolts
-Vitara/YCP 8.5:1 turbo pistons
-Full floating wrist pins
-Freshly honed cylinder walls (before rebuild)
-New seals and gaskets
-ACL bearings
-ARP head studs
-Used for about 2500 miles after built.


~~~~~OR~~~~~

Speed-O-Motive H beams + Vitara Pistons - 300$
ARP head studs (torqued twice) - 80$
D16Y8 crank - 50$
Stock D16Y8 pistons and rods - 40$
Bare D16Y8 block with oil pan - 75$

Or make your own package, and I'll tell you the total!

D16Y5 (HX/VTEC-E) 5SPD transmission - 100$
- 120k miles on it
- Slight grind in 2nd gear

DC Sports header - 150$
- One small dent on the very bottom, does not effect air flow through the pipe.
- Used for about 10k miles, still fits perfect, no leaks, no cracks, etc.


Let me know if anyone is interested. Thanks
Author:  Highway-Star [ April 08, 2008 ]
Post subject: 

Bump, everything is OBO..
Author:  Highway-Star [ April 21, 2008 ]
Post subject: 

Bump.
ARP's and crankshaft sold.
All times are UTC-04:00 Page 1 of 1