I'm excited to announce that thejdm is now updated to the latest phpbb 3.2 software. You may notice the site is now mobile friendly but with the upgrade comes some hiccups. theGarage, theGallery, theArcade are no longer supported. In due time the developers should be working to release the modifications to work on the new software. #LetsMakeForumsGreatAgain
Munster's Winter Thread.
i will choose when i get up there wich ever one makes your mascara run i will take the other. 
Race car: 95 EX w/fully built 2.0 TypeR w/GT30R turbine
1.870 60ft [email protected] 225/50 R15 BFG drag radials, full interior.
513.61whp 425.98ft/lbs @ 26psi VP112
tunerzine article: http://tunerzine.com/view_article/car_feature/turbokoop
salt warrior-89 toyota SR5 extended cab pick up 324,XXX & still running strong
builtmotorsportswear.com
jdmland.com
1.870 60ft [email protected] 225/50 R15 BFG drag radials, full interior.
513.61whp 425.98ft/lbs @ 26psi VP112
tunerzine article: http://tunerzine.com/view_article/car_feature/turbokoop
salt warrior-89 toyota SR5 extended cab pick up 324,XXX & still running strong
builtmotorsportswear.com
jdmland.com
- SIMPLEGREEN
- 5% ricer
- Posts: 791
- Joined: December 28, 2003
- Location: DevineWind, CA.
GANSTA!!!!!munster wrote: 84mm gsr w/ 89mm stroke.
AHAHAHA YEAH I GOT ONE MORE FEATURE COMING OUT SOONZero wrote:
SIMPLEGREEN how many magazines are you gonna get that car put into! i saw it on another mag just today HCI i believe...

Thank you to my sponsors :
SympleSpeedGarage*StreetImage*Rywire*ImportAutoPros* Function&Form*StatusRacing*ASCspeedmetal*
VibrantPerFormance*Skunk2*PLAN:B*LRautobody*
PasswordJDM*RadiumEngineering*CircuitHero*RSmachines*
BuiltMotorsportwear*RamsinEngineering*
VelocityPowdercoat*GoAutoworks*Hondata*BloxRacing*
FalkenTires*AutoFashion*HeelToeAuto*Downstar*
DefinitePowderKoat
DEVINE WIND RACING
R.I.P. JON TANJI...DOHC GARAGE LIVES ON FOREVER
Worked at it all day today.
Fenders and sideskirts off. headlight harness is almost done. just have to get some grommets for the holes in the inner fender so I can run through em. got rid of the wiring for the sidemarkers since they're going to be history. cleaned up the sections running to the headlight housings and pulled the loom off of the entire harness in preparation for nylon loom. pulled the battery and fusebox. going to pick up new power wire this week and get the fusebox under the airbag tray. Then figure out how I want to route the power wire to the battery which is going under the drivers side headlight (would go under passenger and make it easy on myself, but ic piping is in the way). Once I finish this part I'm pulling the motor since my bottom end should be finished by then. We'll see, though.
Fenders and sideskirts off. headlight harness is almost done. just have to get some grommets for the holes in the inner fender so I can run through em. got rid of the wiring for the sidemarkers since they're going to be history. cleaned up the sections running to the headlight housings and pulled the loom off of the entire harness in preparation for nylon loom. pulled the battery and fusebox. going to pick up new power wire this week and get the fusebox under the airbag tray. Then figure out how I want to route the power wire to the battery which is going under the drivers side headlight (would go under passenger and make it easy on myself, but ic piping is in the way). Once I finish this part I'm pulling the motor since my bottom end should be finished by then. We'll see, though.
munster wrote:Worked at it all day today.
Fenders and sideskirts off. headlight harness is almost done. just have to get some grommets for the holes in the inner fender so I can run through em. got rid of the wiring for the sidemarkers since they're going to be history. cleaned up the sections running to the headlight housings and pulled the loom off of the entire harness in preparation for nylon loom. pulled the battery and fusebox. going to pick up new power wire this week and get the fusebox under the airbag tray. Then figure out how I want to route the power wire to the battery which is going under the drivers side headlight (would go under passenger and make it easy on myself, but ic piping is in the way). Once I finish this part I'm pulling the motor since my bottom end should be finished by then. We'll see, though.
Munster this shit is goin to be bad ass cant wait to see the beast at the track and at some jdm meets
Hybridynamic
Neukin
Paps shop
10.52 @ 138
Neukin
Paps shop
10.52 @ 138
- boostjunkie95
- Posts: 2728
- Joined: December 28, 2005
- Location: Revloc, PA
- Contact:
- SingleCamEJ8
- Posts: 4434
- Joined: April 11, 2006
- Location: 559
- Contact:

