Waiting for a transplant

SingleCamEJ8 · Post by **SingleCamEJ8** » March 03, 2007

mcmBuilt wrote:It just keeps getting better and better!!!

agreeeeed

30stones · Post by **30stones** » March 03, 2007

snnnnap....hammer time

boostjunkie95 · Post by **boostjunkie95** » March 03, 2007

sfc wrote:since I have that exact same stand... where the heck did you get the bolts from? And if you just bought them from a hardware store, what size were/are they?

I got the bolts from Home Depot. They are grade 8 and 4" long, thats about all i can remember. I took a tranny bolt with me and went to the metric section and matched up the threads.

sfc · Post by **sfc** » March 03, 2007

boostjunkie95 wrote:I got the bolts from Home Depot. They are grade 8 and 4" long, thats about all i can remember. I took a tranny bolt with me and went to the metric section and matched up the threads.

ya, that'd be my problem, I don't have a tranny bolt around to match up. If you're able to get anymore info on em that would be awesome. Usually they'll have some markings on the head of the bolt too.

hondalowlow · Post by **hondalowlow** » March 04, 2007

SAVE THE SOHC!!! lookin good jay! the clutch is holding up great int he daily!

hondalowlow · Post by **hondalowlow** » March 04, 2007

boostjunkie95 wrote:I got the bolts from Home Depot. They are grade 8 and 4" long, thats about all i can remember. I took a tranny bolt with me and went to the metric section and matched up the threads.

i got 4 DSM 420a headstuds ill give u there a 14mm thread and about 7" long thats what i use to bolt up D/B series to a engine stand

boostjunkie95 · Post by **boostjunkie95** » March 04, 2007

Awesome Jude, glad to hear that the clutching is doing the job.

sfc wrote:ya, that'd be my problem, I don't have a tranny bolt around to match up. If you're able to get anymore info on em that would be awesome. Usually they'll have some markings on the head of the bolt too.

The head says JD 8.8, haha, that prolly doesnt help at all. Check with munster, he would prolly know what size they are.

munster · Post by **munster** » March 04, 2007

boostjunkie95 wrote:Awesome Jude, glad to hear that the clutching is doing the job.

The head says JD 8.8, haha, that prolly doesnt help at all. Check with munster, he would prolly know what size they are.

I did the same thing. Just pulled a tranny bolt out and sized it. Bought a ton of washers too.

Sohchonda5221 · Post by **Sohchonda5221** » March 06, 2007

Ahhh hell yah i see why u sold the old rods now awesome man can't blame ya on savin money and shit like that.. can't wait ill summer man keep up the good work

EK29K · Post by **EK29K** » March 16, 2007

very nice...i want to build a boosted singlecam