I agree with Knauff on the springs/retainers. I'd go with CP pistons. Most of the time pistons are a matter of opinion, but I'm going CP because I never heard anything bad about em.
I would also go with a RLD manifold. Very high quality.
| thejdm.com v6 [2026 rebirth] https://www.thejdm.com/forum/ Print view |
|
| Floyds JdmRhdDohcLsVtecTurbo monster https://www.thejdm.com/forum/viewtopic.php?f=31&t=7604 |
Page 1 of 13 |
| Author: | civic946 [ December 30, 2006 ] |
| Post subject: | Floyds JdmRhdDohcLsVtecTurbo monster |
Well since the RHD is almost done i have alot of shit i have to do to get this monster on the road...... Right now i am gettin the rockers and quaters in this weekend i hope...... then i am goin to 1. Get the body work done 2. Get the car and cage painted 3. Put the stock b16 in it until the Ls Vtac is build 4. Take apart my Ls block and A. get it eagle sleeves B. get eagle rods C. get pistons????? on what kind to get 5. Get my B16 head that i bought fixed A. Find type R cams B. Find type R valves springs C. Find type R Retaners 6. Get the rest of the motor parts A. Head steds B. All new seals C. Water pump-timing belt D. O yer get my Brand Type R Tranny with lsd C. You all know what i mean just a example of what i need. 7 Put motor back together 8. Start with the turbo kit. A. Gt35r aka turbo B. Equal length Manifold ?????????? on what one C. Tial Bov and Wastegate D. Get intercooler and charge pipe also dont know what size to get E. Oil lines and anything else i would need 9. Take old b16 motor out and Put the new Ls vtac in A. Put all the turbo goods on B. Take my ecu to Dennis from Hybrid to get a basemap C. Take my Rhd to my Boy Dennis D. Hope for very high numbers E. I would like to have atleast 600 whp but if i get more i will be so happy but if not o well 500 or more whp would be lots of fun hahaha 10. Take the beast to the track and have some fun A. Well get slicks B Race gas it up yo Well guy i know what i want to do and im startin work on my dream motor and turbo set up that will hopefully be on the track by summer but i hope no later then fall bc i would like to have a lil fun spoolin it up......... But the Rhd will be at car shows this spring and summer but not with my dream set up unless i find some money on the ground and run home and spend it hahaha well this is Floyd over and out |
|
| Author: | vtecdood [ December 30, 2006 ] |
| Post subject: | |
I would recomend going with a different set of springs and retainers type r is good for all motor but even then what you spend on that you could get after market (crower,omni,supertech,etc....) and it would be better in the end for boost. just my 2 cents.. look into the equal lengths hybrid offers, RLD fab. Jay uses them on all 240's he builds eric has it on his type r and mr. miyogy has it on his monster as well they hold up well and cost effective. good luck |
|
| Author: | munster [ December 30, 2006 ] |
| Post subject: | |
I agree with Knauff on the springs/retainers. I'd go with CP pistons. Most of the time pistons are a matter of opinion, but I'm going CP because I never heard anything bad about em. I would also go with a RLD manifold. Very high quality. |
|
| Author: | civic946 [ December 30, 2006 ] |
| Post subject: | |
hey man thanks and i was talkin to eric and he did show me his friend that makes the Rld manifold and he said that he has never had a problem with his mani I agree with Knauff on the springs/retainers. I'd go with CP pistons. Most of the time pistons are a matter of opinion, but I'm going CP because I never heard anything bad about em. I would also go with a RLD manifold. Very high quality. Hey munster i also was thinkin about Cp pistons but one of my best friends Chris Bolin the one that is helpin me out with my build he said that wisco is a good piston but i still have time to think about the name brands i want bc this build is goin to run me some decent money but in the end it is what i want Thanks guys for your help if you want to shoot me any more optoions let me hear them... Floyd |
|
| Author: | SIMPLEGREEN [ December 30, 2006 ] |
| Post subject: | |
GOOD LUCK BRO...ITS DEFINITELY GONNA BE A GANSTA ASS SETUP |
|
| Author: | SingleCamEJ8 [ December 30, 2006 ] |
| Post subject: | |
damn...sounds like it really is gonna be a monster! good luck....LS-VTEC turbo sounds sick! |
|
| Author: | 30stones [ December 30, 2006 ] |
| Post subject: | |
RLD FAB = great manifold and its not expensive compared to some of the other equal lengths out there. goodluck floyd cant wait to see it all done. what color are you painting it? |
|
| Author: | hondalowlow [ December 30, 2006 ] |
| Post subject: | |
my buddy has a 98 ITR head for sale. complete with cams and everything. no valve cover |
|
| Author: | boostjunkie95 [ December 30, 2006 ] |
| Post subject: | |
Your car is going to be baller when its finished Floyd. I cant wait to see it all come together man. |
|
| Author: | civic946 [ December 30, 2006 ] |
| Post subject: | |
hey thanks dude i think im goin to go white with black wheeels and black inteior |
|
| All times are UTC-04:00 | Page 1 of 13 |
|
Powered by phpBB® Forum Software © phpBB Limited |
|