thejdm.com v6 [2026 rebirth]
https://www.thejdm.com/forum/
Print view

A little help would be greatly appreciated.
https://www.thejdm.com/forum/viewtopic.php?f=42&t=8405		 Page 1 of 2
Author:  littledevil666 [ May 01, 2007 ]
Post subject:  A little help would be greatly appreciated.
A friend of mine has a 1990 240sx. He did the 1.8 turbo swap into it. It cranks over fine but doesnt fire up. We checked the spark and it does spark, seems to be a little weak but should be enough to fire it. The main problem is that we noticed that the ecu is powered up even with the ignition switch unplugged. Now I am not expecting immediate answers from the info I have given, but any other questions I will answer the best I can, and any ideas on what mite be going on or things to try would be greatly appreciated. Thanks guys.
Author:  Sean @ NDF [ May 01, 2007 ]
Post subject: 
SS, Toby, and the Hybrid guys might have some answers.
Author:  Bennett @ ESG [ May 01, 2007 ]
Post subject: 
Sean @ ESG wrote:SS, Toby, and the Hybrid guys might have some answers.
only if the questions are about man-on-man anal
Author:  77 [ May 01, 2007 ]
Post subject: 
Bennett @ ESG wrote:only if the questions are about man-on-man anal
True.
I'll ask Jeff about it, he's doing the same swap.
He also reads books....
...and does other gay-like things.
Author:  Sean @ NDF [ May 01, 2007 ]
Post subject: 
readings the gayest evar
Author:  littledevil666 [ May 01, 2007 ]
Post subject: 
yea he has read every possible thing that he could find on it, i think he has a wire crossed somewhere personally, but we couldnt find one
Author:  .saint [ May 01, 2007 ]
Post subject: 
is it grouned well?
Author:  Secret Squirrel [ May 01, 2007 ]
Post subject: 
the problem is he bought a ca18det....Swap with a good known motor to solve problem.


I hit u up on AIM...i have a few things i need you to check, and a few suggestions




SS




SS
Author:  idreamidrive [ May 01, 2007 ]
Post subject: 
Secret Squirrel wrote:the problem is he bought a ca18det....Swap with a good known motor to solve problem.


I hit u up on AIM...i have a few things i need you to check, and a few suggestions




SS




SS
ya you did go the wrong way with that motor... cant even get the head back on yours




and nice double SS posting
Author:  Secret Squirrel [ May 02, 2007 ]
Post subject: 
i need a special socket for the ARP studs. and im lazy.




SS
All times are UTC-04:00 Page 1 of 2

Powered by phpBB® Forum Software © phpBB Limited