| thejdm.com v6 [2026 rebirth] https://www.thejdm.com/forum/ Print view |
|
| looking for a cheap sohc vtec minus tranny https://www.thejdm.com/forum/viewtopic.php?f=52&t=1686 |
Page 1 of 2 |
| Author: | jay-six [ April 14, 2004 ] |
| Post subject: | looking for a cheap sohc vtec minus tranny |
if n e one knows where i can get one please let me know.. d16z6 or y8 will work.. its for my 91 4 door i picked up for 100 bucks. i wanna make it into a sleeper but with an affordable engine because i do not have alot of extra money right now but it needs an engine to be moved. thanks for any help |
|
| Author: | jay-six [ April 16, 2004 ] |
| Post subject: | |
n e one ? |
|
| Author: | kotomile [ April 16, 2004 ] |
| Post subject: | |
The Z6 and Y8 would both be motors with different OBD generations than the car. You could make it plenty quick by installing a D16A6 or ZC, and skip the wiring headache. There's a guy locally that put a D16A6 in his four-door ED and he's faster than me in autoX (he's a faster driver). It was actually the D16A6 from my CRX... |
|
| Author: | jay-six [ April 16, 2004 ] |
| Post subject: | |
wiring is no problem for me |
|
| Author: | jay-six [ April 16, 2004 ] |
| Post subject: | |
as far as the obd part of it .. all i have to do is change the intake manifold to the spare obd 0 one i have laying in my garage and that problem would be solved |
|
| Author: | kotomile [ April 16, 2004 ] |
| Post subject: | |
and the distributor and the injector plugs |
|
| Author: | kotomile [ April 16, 2004 ] |
| Post subject: | |
and the ECU should be chipped for the VTEC motor |
|
| Author: | jay-six [ April 16, 2004 ] |
| Post subject: | |
it will be |
|
| Author: | kotomile [ April 16, 2004 ] |
| Post subject: | |
coo Good luck!! |
|
| Author: | jay-six [ April 16, 2004 ] |
| Post subject: | |
thanks.. i cant wait to get it all together |
|
| All times are UTC-04:00 | Page 1 of 2 |
|
Powered by phpBB® Forum Software © phpBB Limited |
|