| thejdm.com v6 [2026 rebirth] https://www.thejdm.com/forum/ Print view |
|
| need help exhaust question https://www.thejdm.com/forum/viewtopic.php?f=52&t=6932 |
Page 1 of 2 |
| Author: | hondalowlow [ August 16, 2006 ] |
| Post subject: | need help exhaust question |
so i got bored today and i went to the local exhaust shop and had a 2.5" catback bent for the hatch. my old piping was 1 3/4 " small but so ristrictave to flow the new exhaust is insane for power and loud as hell, you can hear the turbine spooling wich is neat and loud also but the overall exhaust noise is extremily loud, i have goldies old n-1 turbo muffler on my EK and it was a deep mello tone wich i liked. so does anybody know of how i can keep the 2.5" flow of my exhaust but make it quiet? i was thinking of a 30" glasspack to quiet it up??? gimme your opnions. |
|
| Author: | boostjunkie95 [ August 16, 2006 ] |
| Post subject: | |
Run a silencer in the end of the muffler, it quiets them up alot. Im not sure what effect it has on performance though. |
|
| Author: | hondalowlow [ August 16, 2006 ] |
| Post subject: | |
its to restrictave. i may as well put the old B pipe on. |
|
| Author: | kotomile [ August 17, 2006 ] |
| Post subject: | |
wait, goldie had a "n1 turbo muffler"? |
|
| Author: | hondalowlow [ August 17, 2006 ] |
| Post subject: | |
n-1 turbo catback. until it got scraped off |
|
| Author: | Secret Squirrel [ August 17, 2006 ] |
| Post subject: | |
weld in a turbo muffler...bitch will be super quite and wont hurt performance. magnaflow makes a quality product SS |
|
| Author: | vtecdood [ August 17, 2006 ] |
| Post subject: | |
X2 exactly what i was gonna recomend we have been using a lot of magnaflow stuff on cars to get a deeper tone you can get all type length of resognators wich will not restrict flow. |
|
| Author: | BRYCE [ August 17, 2006 ] |
| Post subject: | |
haha |
|
| Author: | munster [ August 17, 2006 ] |
| Post subject: | |
Magnaflow = the win. Especially little stubby ass excuses for a muffler. |
|
| Author: | hondalowlow [ August 19, 2006 ] |
| Post subject: | |
i went and got a 2.5" inlet/outlet 30" long magnaflow resinator/glasspack for it, cut and welded it in, its straight through flow so it wont hurt perfoirmance and sounds good. its a little loud for me but i gotta remember that i got 2.5" on my car now not 1.3/4" so problem solved, i bet if i get a new n-1 with the perfs inside it and not a peice of 2.5 pipe butted up to the inner funnel and welded it will quiet it up more, but we will see for the most part problem solved. i bet it toned it dwon 60% of what it was but it has that mean bark when you jump on it. it sounds good but like i said its a little too loud for me i like deep mello tones, but i guess im stuck with it. oh yeah i smoked a 98 comaro ss with a CX tranny, the EX soon to be installed. muhahahaha |
|
| All times are UTC-04:00 | Page 1 of 2 |
|
Powered by phpBB® Forum Software © phpBB Limited |
|