thejdm.com v6 [2026 rebirth]
https://www.thejdm.com/forum/
Print view

Finally lowered my car!!!.......kinda......
https://www.thejdm.com/forum/viewtopic.php?f=52&t=9823
Page 1 of 4
Author:  Colin [ April 13, 2008 ]
Post subject:  Finally lowered my car!!!.......kinda......

Well a few of my buddies helped put in my suspension saturday. got 3 of the corners done but we could not get the rear shock out. the bolted connection to the trailing arm was giving us a huge ass problem. we put an impact wrench to it, a torch to it, 10ft of ghetto breaker bar to it, no budging.

Anyone know a place in pittsburgh that isn't going to charge me an outrageous amount to chop off the bolt and put a new one in? we'll pull the shock ourselves, we just need that facking bolt off.
Author:  .saint [ April 13, 2008 ]
Post subject: 

damn that sucks. u been soaking it in blaster? shit usually will break free after awhile.

i had the same prob with my rear. the lca bushing gelded itselg to the bolt and blew the entire rear lca bushing out of my srr lca's :thumbdown:

now i wanna roll PIC lca's and titanium lca bolts. but $

best of luck getting this all squared away.
Author:  93ludeSi [ April 13, 2008 ]
Post subject: 

Can you get a grinder in there? or a chisel and hammer? plenty of ways to get a bolt off if your not worried about saving it...
Author:  kotomile [ April 13, 2008 ]
Post subject: 

PB Blaster has been my friend on many occasions. If I know I'm working on something tomorrow, I'll start it soaking in the Blaster today. Makes a world of difference.
Author:  Colin [ April 13, 2008 ]
Post subject: 

kotomile wrote:PB Blaster has been my friend on many occasions. If I know I'm working on something tomorrow, I'll start it soaking in the Blaster today. Makes a world of difference.
^^they sell that shit at autozone? may try soaking it for a few days then having another go at it.
Author:  ef8 mcm [ April 13, 2008 ]
Post subject: 

sawzaw
Author:  vtecdood [ April 13, 2008 ]
Post subject: 

ef8 mcm wrote:sawzaw

X2 :bang:

and try spurting marvel mystery oil on it
Author:  Dont Blink [ April 13, 2008 ]
Post subject: 

ef8 mcm wrote:sawzaw
vtecdood wrote:X2 :bang:

and try spurting marvel mystery oil on it
marvel mystery oil got all the bolts loose on the rear of my hatch but one, and a sawzall took car of the last one in like 2 seconds(with a fresh blade).
Author:  Colin [ April 13, 2008 ]
Post subject: 

guess ill go down to autozone and see if they have it and let it soak ovrnight.

until then ill just get my gangsta lean on :cool:
Author:  kotomile [ April 13, 2008 ]
Post subject: 

Colin wrote:^^they sell that shit at autozone? may try soaking it for a few days then having another go at it.
They sell that shit everywhere.
All times are UTC-04:00 Page 1 of 4