| thejdm.com v6 [2026 rebirth] https://www.thejdm.com/forum/ Print view |
|
| question about EKs https://www.thejdm.com/forum/viewtopic.php?f=83&t=3953 |
Page 1 of 1 |
| Author: | Project98EK [ May 23, 2005 ] |
| Post subject: | question about EKs |
i have a 98 hatch, wondering if the climate control bezel from a 99-00 will fit easily and all the right connectors are the same *plug and play* ??????? |
|
| Author: | .saint [ May 23, 2005 ] |
| Post subject: | |
short and simple... NOT plug and play. converting a 96-98spec climate control to 99-00 spec is alot of work. since the 99-00 is motorized and the 96-98 is all slide. any 99-00spec CC will fit the 96-98 hole. but u need alot of parts to make them work right. all the wiring harnesses, the blower box. all kinda of stuff. unless you are going for looks i wouldnt attempt it without looking into it. it can be done but im not sure whats all involved. i just know its a project and will cost a bit of money. |
|
| Author: | Sean @ NDF [ May 23, 2005 ] |
| Post subject: | |
not worth the money, plus 96-98 cc's own... |
|
| Author: | Project98EK [ May 23, 2005 ] |
| Post subject: | |
damn just curious....thanks guys |
|
| Author: | BRYCE [ May 23, 2005 ] |
| Post subject: | |
yea honestly its not worth it at all |
|
| Author: | jag. [ May 27, 2005 ] |
| Post subject: | |
if your serious about doing it, heres the how-to http://www.honda-tech.com/zerothread?id=605432 |
|
| Author: | Project98EK [ May 28, 2005 ] |
| Post subject: | |
thanks jag, preciate it |
|
| All times are UTC-04:00 | Page 1 of 1 |
|
Powered by phpBB® Forum Software © phpBB Limited |
|