I'm excited to announce that thejdm is now updated to the latest phpbb 3.2 software. You may notice the site is now mobile friendly but with the upgrade comes some hiccups. theGarage, theGallery, theArcade are no longer supported. In due time the developers should be working to release the modifications to work on the new software. #LetsMakeForumsGreatAgain
HELP ME PLEASE... I NEED SWAP INFO....
-
latenightcustom
- 95% ricer
- Posts: 52
- Joined: August 12, 2005
- Location: milwaukee
- Contact:
-
latenightcustom
- 95% ricer
- Posts: 52
- Joined: August 12, 2005
- Location: milwaukee
- Contact:
Hey Find a SR20DE, an older one that has a limited slip diff. Then get a stock sr20DET or GTI-R manifold, T25 or T28 turbo, and a J pipe. Then find a down pipe and a stock nissan FMIC and some 370cc or 550cc injetors "depending on the power you want". AFC or new computer, or MAFT...
SR20 parts go to http://www.sr20forum.com
or http://www.allnissans.com/index.php
You can also find some stuff on ebay but forums are better!
If you look/what for good deals doing the setup above will run you $500-$1000
Turboing the GA would run you $1000+
SR20DET FWD $1500+
Look at wes ga16 turbo setup, we did some work for him. His setup puts out some power!
http://www.nissanperformancemag.com/pro ... iltwin.php
Are setup on the 200sx is the gray cermaic coated manifold and j pipe the other is a GTIR setup. GTIR manifolds are way better but you will pay for it
With the GTIR manifold you can get a t25 or t28 on the stock SR20DET FWD or RWD manifold you have to run a T25
If you have any more questions just let me know!
Thanks Jordan @ LNC
SR20 parts go to http://www.sr20forum.com
or http://www.allnissans.com/index.php
You can also find some stuff on ebay but forums are better!
If you look/what for good deals doing the setup above will run you $500-$1000
Turboing the GA would run you $1000+
SR20DET FWD $1500+
Look at wes ga16 turbo setup, we did some work for him. His setup puts out some power!
http://www.nissanperformancemag.com/pro ... iltwin.php
Are setup on the 200sx is the gray cermaic coated manifold and j pipe the other is a GTIR setup. GTIR manifolds are way better but you will pay for it
With the GTIR manifold you can get a t25 or t28 on the stock SR20DET FWD or RWD manifold you have to run a T25
If you have any more questions just let me know!Thanks Jordan @ LNC