I'm excited to announce that thejdm is now updated to the latest phpbb 3.2 software. You may notice the site is now mobile friendly but with the upgrade comes some hiccups. theGarage, theGallery, theArcade are no longer supported. In due time the developers should be working to release the modifications to work on the new software. #LetsMakeForumsGreatAgain

bleeder help

fifth genertion civic & del sol tech. [92-95]
Post Reply
Bangin HB
90% ricer
Posts: 109
Joined: July 27, 2004
Location: Ft. Laud/Orlando, FL
Contact:
Contact Bangin HB

bleeder help

Post by Bangin HB » October 19, 2004

anyone know the size of the bleeders on a 5th gen? 92dx hatch if needed. my MC went out, and im away from home so i dont have access to my usuall tools. so i need to go buy some for the job, and i need to know the size of the bleeder screws
Image
^clicky for the NEW all hatch community: e-hatch
Top
BRYCE
Posts: 5323
Joined: January 18, 2004
Location: Twin Cities, MN
Contact:
Contact BRYCE

Post by BRYCE » October 19, 2004

most likey 8mm or 10mm. Most likey 8 though
AE86 Levin Coupe x SR20DET x Watanabe R-Type
Bryce
Top
SleepyCx
95% ricer
Posts: 58
Joined: October 07, 2004
Location: Medford Oregon
Contact:
Contact SleepyCx

Post by SleepyCx » October 27, 2004

clutch or brake clutch both are 8's except for some reason my back brakes are 10's because i have swapped rear disk brakes...
Image
I thought nitrous was supposed to get you high
93 Pearl White Cx...
Top
Bangin HB
90% ricer
Posts: 109
Joined: July 27, 2004
Location: Ft. Laud/Orlando, FL
Contact:
Contact Bangin HB

Post by Bangin HB » October 27, 2004

oops, job done. anyone curious tho about doing a brake job: 12mm to take the MC off the booster; 10mm flare-nut wrench for the hard lines to the MC; 8mm for the drum bleeders; 10mm for the caliper bleeders.

and if you get stuck like me, 19mm socket with a breaker bar for the wheels (damn tire iron wouldnt fit!)
Top
Post Reply

Return to “eg & del sol”