rear bracket and driver side mount

phatboi · Post by **phatboi** » January 28, 2005

alritez i just got the rear bracket from an si the L bracket. but i couldnt find a driver side mount. and some guy that i know he said that the stock driver side mount would wit the swap that im getting and i dont need the driver side mount from an si can any one confirm that?

thanks danny

munster · Post by **munster** » January 28, 2005

What motor in what chassis?

If you're talking about an EK...I needed both the 99-00 Si rear mount (The L mount) and the cast iron part of the drivers side mount (attaches to the block). The Si and stock look very similar, but if you put them beside one another you can see that the Si is angled differently.

Each mount is about $50 from a dealership.

phatboi · Post by **phatboi** » January 28, 2005

yeah its a b18 that is going in to my ek thanks to ill probably go to the dealers today to find out a price

munster · Post by **munster** » January 28, 2005

I can find you the Honda part numbers if you want.

The first time that I ordered mine they screwed up and tried to give me a V6 Accord mount.

munster · Post by **munster** » January 29, 2005

You need #7 and the bracket that has "a 5-20" listed beside it, but you just need that bracket. You can reuse the studs from your EK along with the other parts.

http://www.hondaautomotiveparts.com/aut ... 29+%284%29

Print that page and take it to the dealership.

phatboi · Post by **phatboi** » January 29, 2005

good stuff thanks alot haha