I'm excited to announce that thejdm is now updated to the latest phpbb 3.2 software. You may notice the site is now mobile friendly but with the upgrade comes some hiccups. theGarage, theGallery, theArcade are no longer supported. In due time the developers should be working to release the modifications to work on the new software. #LetsMakeForumsGreatAgain

Project thrizzed - Update

fourth generation civic & crx tech. [84-91]

Moderator: Nikku

User avatar
Zero
Posts: 2054
Joined: June 17, 2006
Location: Las Vegas
Contact:

Post by Zero » June 21, 2006

its almost the exact same as your just brown

User avatar
tomoyasu
Posts: 1716
Joined: January 17, 2006
Location: Spokane, Wa
Contact:

Post by tomoyasu » June 23, 2006

well dose yours have the part that goes down, like the "floor console:" or what eva?
-1990 Civic Hatch STD with b16a

Image

User avatar
Zero
Posts: 2054
Joined: June 17, 2006
Location: Las Vegas
Contact:

Post by Zero » June 24, 2006

ill get some pics and post them in a few.

User avatar
tomoyasu
Posts: 1716
Joined: January 17, 2006
Location: Spokane, Wa
Contact:

Post by tomoyasu » June 24, 2006

do it up

Bart-EK
45% ricer
Posts: 455
Joined: January 26, 2004
Location: Netherlands, Europe
Contact:

Post by Bart-EK » July 10, 2006

add-ons for handling:

A-sports fender braces
Cusco front and rear lower tie bars
get JDM siR sway bars, or some kit from the US
that, together with the spoon upper bars will give great performance....
Also, get decent rubber wrapped around them P-1's ;)

When lowering with full coilovers: approx 1.75" or a maximum of 2" is the way to go. major droppage may look cool, but drives like shit... try to keep the rear about 0.25" higher than the front... may sound stupid but looks good and rsults in slightly better handling as well...

for the engine: save up and get everything from an ITR, or equal... bolt-ons, cams etc... should give the b16 a nice 'almost' 200hp without too much work inside the engine...
tuning is key though...

mmm well... your mod list is pretty well put together, so no real other comments (yet)...
if you want some input on your thoughts or anything: ask :)
'00 EK3 Civic 1.5i LS VTEC-E [d15z6]
'98 DC2 Integra type R [hella fun]

"History is written by the winner."
No where the f**k did I leave my pen?

User avatar
tomoyasu
Posts: 1716
Joined: January 17, 2006
Location: Spokane, Wa
Contact:

Post by tomoyasu » July 12, 2006

sounds like you know what your talking about.

i like the 'almost 200hp' :)

yeah i do plan on getting some decent tires, some falken azenis i think

im not sure what color i want to go with though. im thinking a medium gray, i like the one on the new RSXs or something close to that

Bart-EK
45% ricer
Posts: 455
Joined: January 26, 2004
Location: Netherlands, Europe
Contact:

Post by Bart-EK » July 13, 2006

OEM Barcelona green... EF9 color :)

about the Azenis: what do the RT 615's cost in the US? I was quoted a friggin 177€ a piece (which works out to around $200 a tire I guess)

that was 205/40/17

User avatar
tomoyasu
Posts: 1716
Joined: January 17, 2006
Location: Spokane, Wa
Contact:

Post by tomoyasu » July 13, 2006

meh, im not a "green fan"

for 15s which i plan on getting they are $100 per tire through JHPusa.com

not sure about the 17s though

Bart-EK
45% ricer
Posts: 455
Joined: January 26, 2004
Location: Netherlands, Europe
Contact:

Post by Bart-EK » July 14, 2006

it's not going to make a $100 difference...
irritating how you guys get all the good stuff so cheap compared to here

User avatar
tomoyasu
Posts: 1716
Joined: January 17, 2006
Location: Spokane, Wa
Contact:

Post by tomoyasu » July 14, 2006

muahahahaha

Post Reply