I'm excited to announce that thejdm is now updated to the latest phpbb 3.2 software. You may notice the site is now mobile friendly but with the upgrade comes some hiccups. theGarage, theGallery, theArcade are no longer supported. In due time the developers should be working to release the modifications to work on the new software. #LetsMakeForumsGreatAgain
HID opinions
-
tommybanzai
- 25% ricer
- Posts: 639
- Joined: June 29, 2003
- Location: Ill Ass J-town
- Contact:
Robry, I don't understand why you needed to use this(you sent to me via myspace:
"The kit is great quality, works absolutely perfect, even has a harness w/ fuse and relay, so it doesn't draw power from the factory harness."
I know your kit works fine, as I have been blinded by the light before. Is it just because the purevision kit draws a lot of power through the factory wiring that you ad to use it?... it's one thing I have learned reading up on these. That certain kits will/will not place excess draw on your factory wiring. And usually it is just for the initial start up that the current is high (maybe first >1 second). I noticed the company/guy you directed me to has both purevision and techone...why did you get the purevision?..solely price?...or should I just call and ask him personally?
i.e.: I been looking at the Techone kit more and more. It has a lot of +'s I feel good about.
" This HID kit has everything you need. You get the HID Xenon bulbs, ballasts with integrated igniters, wiring harness, zip ties, mounting plates, mounting screws, and installation instructions. These kits were designed to be plug and play so there will be no need to cut, splice, or solder anything together! 100% compatible with your car's OEM wiring and literally takes 5-10 minutes for even a beginner to install. Better yet, all components are weather-proof, but the biggest and best feature lies with the ballast. Unlike OEM ballasts, the Techone ballasts only draw 7.5A upon startup for the first 3 seconds, then only 3A while running! This makes it safe to use with OEM wiring WITHOUT THE NEED FOR AN UPGRADED HARNESS! This saves you tons of time, hassle, not to mention a much cleaner looking engine bay and saves you $50!"
Thanks again robry and others...your input is appreciated greatly!!!
"The kit is great quality, works absolutely perfect, even has a harness w/ fuse and relay, so it doesn't draw power from the factory harness."
I know your kit works fine, as I have been blinded by the light before. Is it just because the purevision kit draws a lot of power through the factory wiring that you ad to use it?... it's one thing I have learned reading up on these. That certain kits will/will not place excess draw on your factory wiring. And usually it is just for the initial start up that the current is high (maybe first >1 second). I noticed the company/guy you directed me to has both purevision and techone...why did you get the purevision?..solely price?...or should I just call and ask him personally?
i.e.: I been looking at the Techone kit more and more. It has a lot of +'s I feel good about.
" This HID kit has everything you need. You get the HID Xenon bulbs, ballasts with integrated igniters, wiring harness, zip ties, mounting plates, mounting screws, and installation instructions. These kits were designed to be plug and play so there will be no need to cut, splice, or solder anything together! 100% compatible with your car's OEM wiring and literally takes 5-10 minutes for even a beginner to install. Better yet, all components are weather-proof, but the biggest and best feature lies with the ballast. Unlike OEM ballasts, the Techone ballasts only draw 7.5A upon startup for the first 3 seconds, then only 3A while running! This makes it safe to use with OEM wiring WITHOUT THE NEED FOR AN UPGRADED HARNESS! This saves you tons of time, hassle, not to mention a much cleaner looking engine bay and saves you $50!"
Thanks again robry and others...your input is appreciated greatly!!!
the new and slightly improved...don't piss me off, and i won't f#*k with you!!! *gggrrrr*
-
STEELCITYEVO8
- 100% ricer
- Posts: 31
- Joined: December 02, 2006
- Location: pittsburgh pa
- Contact:
get them u will appreciate the difference. far better than normal lighting!!
Rally Red evo VIII/ GT3076R/ AEM EMS/ EXEDY TWIN DISK/ HKS 272'S/420WHP/337LB.FT BUSCHUR TUNED/[email protected]/ http://www.racerswanted.net/
-
tommybanzai
- 25% ricer
- Posts: 639
- Joined: June 29, 2003
- Location: Ill Ass J-town
- Contact:
