Tested parts that fit...on the Fit

98exploda · Post by **98exploda** » March 31, 2007

i like that silver one

SingleCamEJ8 · Post by **SingleCamEJ8** » March 31, 2007

yeah taht shit is plain and simple.

Bennett @ ESG · Post by **Bennett @ ESG** » April 01, 2007

Sean @ ESG wrote:I don't think adam will mod it until the warranties up

or until his girlfriend turns 15. ZING!

Bennett @ ESG · Post by **Bennett @ ESG** » April 01, 2007

btw, i like the FO-DOS on the fit. It's already slow, might as well make it easy for the fam.

pimpinpunk · Post by **pimpinpunk** » April 25, 2007

I sure love them colored headlights! O.E.M @ its best! I also like the darker bronze Metal! Nice. Props to a-j!

Post by **JaySmith** » October 22, 2007

What about turning this into a GD3 FAQ? As I just finish making this template for the sidemarker placement thanks to both Jazz styler for taking the time to take the measurements and STTICH as I stole one of his photographs. lol.

Also just to once more clarify, there are two different variations of the Honda Sidemarkers depending on country. The lower end models like the 1.3A and 1.5A in Japan came with the Clear Sidemarkers, where as some models in Europe came with the Amber Sidemarkers.

And another BIG thanks to Evert aka Jazz styler for also informing me that the sidemarkers are to be installed in this fashion.

Once I can track down some dimensions for the actual sidemarker hole, I will make up a template for it as well.

Post by **JaySmith** » October 23, 2007

Thanks to Matt at ICB Motorsport, I was able to find out tonight that the EDM/JDM Honda Sidemarkers for the Honda Fit (GD3) are actually the exact same ones found on the JDM Honda Integra (DC5).

I then took and remade a Sidemarker Template I had found on ClubRSX.com to better match the previous templates I made. But of course with anything you find on the internet, you should use this template at your own discretion. With that said, using a piece of cardboard, cut it out before even remotely attempting to do this on your own personal vehicle to make certain of the fitment of the sidemarkers.

pimpinpunk · Post by **pimpinpunk** » November 06, 2007

JDM_EK3 wrote:Thanks to Matt at ICB Motorsport, I was able to find out tonight that the EDM/JDM Honda Sidemarkers for the Honda Fit (GD3) are actually the exact same ones found on the JDM Honda Integra (DC5).
I then took and remade a Sidemarker Template I had found on ClubRSX.com to better match the previous templates I made. But of course with anything you find on the internet, you should use this template at your own discretion. With that said, using a piece of cardboard, cut it out before even remotely attempting to do this on your own personal vehicle to make certain of the fitment of the sidemarkers.

is this a hint your planning to get Sidemarkers?...

Post by **JaySmith** » November 11, 2007

pimpinpunk wrote:is this a hint your planning to get Sidemarkers?...

That and the Honda Fit community didn't have a Sidemarker Template up until I made one. :p

pimpinpunk · Post by **pimpinpunk** » November 12, 2007

JDM_EK3 wrote:That and the Honda Fit community didn't have a Sidemarker Template up until I made one. :p

what a thoughtful guy