I'm excited to announce that thejdm is now updated to the latest phpbb 3.2 software. You may notice the site is now mobile friendly but with the upgrade comes some hiccups. theGarage, theGallery, theArcade are no longer supported. In due time the developers should be working to release the modifications to work on the new software. #LetsMakeForumsGreatAgain
engine. drivetrain. engine management & trouble codes talk.
-
tomoyasu
- Posts: 1716
- Joined: January 17, 2006
- Location: Spokane, Wa
-
Contact:
Post
by tomoyasu » January 25, 2008
^ kinda already did that..hooked up a battery jumper directly to the starter and grounded it, still nothing.
-1990 Civic Hatch STD with b16a

-
Natural Aspirations
- 55% ricer
- Posts: 370
- Joined: August 11, 2005
- Location: Altoona, Pa
-
Contact:
Post
by Natural Aspirations » January 25, 2008
12v to the solenoid? the small connection. Adding 12v+ to the big nut will do nothing as it has a direct line from the battery.
-
tomoyasu
- Posts: 1716
- Joined: January 17, 2006
- Location: Spokane, Wa
-
Contact:
Post
by tomoyasu » February 12, 2008
k, now i cant even push start it. pulled the spark plugs, 3 of 4 had some nasty orange-ish corrosion on the upper part of the plug and the wire on the part the connects to the plug..could this have caused my problem?
-
tomoyasu
- Posts: 1716
- Joined: January 17, 2006
- Location: Spokane, Wa
-
Contact:
Post
by tomoyasu » February 12, 2008
well, spark plugs/wires arent the problem.if the alternator gets wet, does that make it completely unusable?
-
boostjunkie95
- Posts: 2728
- Joined: December 28, 2005
- Location: Revloc, PA
-
Contact:
Post
by boostjunkie95 » February 13, 2008
If your alternator is wet it will turn over but not start. Take it apart and hit it with a hair dryer for a couple minutes.
-
Nikku
- Posts: 2818
- Joined: December 19, 2003
- Location: 大阪
-
Contact:
Post
by Nikku » February 13, 2008
did you check the main relay?
Just call me Dr. Vice.
-
tomoyasu
- Posts: 1716
- Joined: January 17, 2006
- Location: Spokane, Wa
-
Contact:
Post
by tomoyasu » February 14, 2008
dont know how/ where. tried searching, the good links ended up being dead. im gonna check the dizzy tomorrow and see what goin on with it..and the main relay if i can figure out how
-
EG2sol
- 70% ricer
- Posts: 280
- Joined: February 15, 2005
- Location: Hollidaysburg,PA
Post
by EG2sol » February 14, 2008
The main relay is in the fuse box under the hood.
-
tomoyasu
- Posts: 1716
- Joined: January 17, 2006
- Location: Spokane, Wa
-
Contact:
Post
by tomoyasu » February 14, 2008
ah word. i shall check it today
-
Natural Aspirations
- 55% ricer
- Posts: 370
- Joined: August 11, 2005
- Location: Altoona, Pa
-
Contact:
Post
by Natural Aspirations » February 15, 2008
EG2sol wrote:The main relay is in the fuse box under the hood.
Defiantly NOT......
Driver footwell on ef/eg behind glove box ek
EF
