I'm excited to announce that thejdm is now updated to the latest phpbb 3.2 software. You may notice the site is now mobile friendly but with the upgrade comes some hiccups. theGarage, theGallery, theArcade are no longer supported. In due time the developers should be working to release the modifications to work on the new software. #LetsMakeForumsGreatAgain
All Nissan Owners, Introduce yourself here
-
Barney_240
- 100% ricer
- Posts: 6
- Joined: August 08, 2003
- Location: Miami, Fl
- Contact:
All Nissan Owners, Introduce yourself here
hey wuz up pplz.. just thought i would make thread for all the fellow Nissan owners. In this thread we would introduce ourselves and what nissan model we own and our mods and our future plans for our cars.
Hey wuz up .. My name is Anthony AKA Barney.. i currently own two 1992 Nissan 240's a fastback and a coupe. Both white. My project car is the s13 coupe.
I'm building the block (KA24DE), with after market pistons and rods, dropping the CR to 8.5:1. the head is going to be stock. Gonna run JWT setup. got a custom manifold made for my turbo which is a t3/t04e, tial 35mm wastegate with a 6-7 spring.
Look wise. i'm currently looking for s14 seats. i already have a silvia conversion in hands.. but that isn't going on until i get some bomex parts.. but that's way after i'm turbo and running the car right. i got the 5 lug conversion done only to the rear with 3rd rx-7 stocks. ran into two problems in the front. the main problem i had was that the rims didn't clear the silvia calipers aka 300zx calipers.
This is just some of many mods my s13 coupe is going thru. Expect pictures very soon.
Hey wuz up .. My name is Anthony AKA Barney.. i currently own two 1992 Nissan 240's a fastback and a coupe. Both white. My project car is the s13 coupe.
I'm building the block (KA24DE), with after market pistons and rods, dropping the CR to 8.5:1. the head is going to be stock. Gonna run JWT setup. got a custom manifold made for my turbo which is a t3/t04e, tial 35mm wastegate with a 6-7 spring.
Look wise. i'm currently looking for s14 seats. i already have a silvia conversion in hands.. but that isn't going on until i get some bomex parts.. but that's way after i'm turbo and running the car right. i got the 5 lug conversion done only to the rear with 3rd rx-7 stocks. ran into two problems in the front. the main problem i had was that the rims didn't clear the silvia calipers aka 300zx calipers.
This is just some of many mods my s13 coupe is going thru. Expect pictures very soon.
1992 Nissan 240 Fastback
15.7 @ 88.3mph
-N-
1992 Nissan 240 Coupe
--Project Car--
15.7 @ 88.3mph
-N-
1992 Nissan 240 Coupe
--Project Car--
.saint, the honda EK parts jdMuseum.
i hope i grow to be half the man my grandfather was.
poop.hell sideways.brigade
http://www.fright.house
i hope i grow to be half the man my grandfather was.
poop.hell sideways.brigade
http://www.fright.house
-
10secondsorbust
- 100% ricer
- Posts: 7
- Joined: November 12, 2003
- Location: youngwood, pa
- Contact:
hey, my name is jason, i work down at hybridynamics, so i'm sure a lot of you have seen my car. if not, you can see it on our website, http://www.hybridynamics.com
anyway, about the car
91 240sx fastback
engine:
redtop S13 SR20det
ACT 6 puck clutch
stock transmission
tomei headgasket, rocker arm stoppers, valve springs
ARP headstuds
greddy intake manifold
tomei 555cc injectors
hks 264in/272ex cams
JGS log manifold
turbonetics t3/t04b turbo (sucks)
turbonetics deltagate
3" DP, hybrid testpipe, blitz nurspec exhaust
koyo radiator
Apexi skyline intercooler
blitz/custom intercooler pipes
HKS race bov
Z32 mass airflow sensor
apexi power fc computer
kaaz 1.5 way limited slip
suspension
tein HA coilovers
tein t/c rods
s14 SE 5 lug conversion
custom power brace
z32 front brakes
kosei k1 17" wheels 245/45 17 rears, 215/45 17 fronts
exterior:
bomex body kit
180sx kouki taillights
shaved marker lights, winshield squirters, and antenna
interior:
nex race buckets
greddy gauges
thats about it, my best quarter mile time is 11.73 @120...i'm gonna be redoing a lot of stuff this winter and hopefully shooting for 10's.
anyway, about the car
91 240sx fastback
engine:
redtop S13 SR20det
ACT 6 puck clutch
stock transmission
tomei headgasket, rocker arm stoppers, valve springs
ARP headstuds
greddy intake manifold
tomei 555cc injectors
hks 264in/272ex cams
JGS log manifold
turbonetics t3/t04b turbo (sucks)
turbonetics deltagate
3" DP, hybrid testpipe, blitz nurspec exhaust
koyo radiator
Apexi skyline intercooler
blitz/custom intercooler pipes
HKS race bov
Z32 mass airflow sensor
apexi power fc computer
kaaz 1.5 way limited slip
suspension
tein HA coilovers
tein t/c rods
s14 SE 5 lug conversion
custom power brace
z32 front brakes
kosei k1 17" wheels 245/45 17 rears, 215/45 17 fronts
exterior:
bomex body kit
180sx kouki taillights
shaved marker lights, winshield squirters, and antenna
interior:
nex race buckets
greddy gauges
thats about it, my best quarter mile time is 11.73 @120...i'm gonna be redoing a lot of stuff this winter and hopefully shooting for 10's.
building a 1991 Nissan 240sx fastback this winter. Hopefully be done by feb/march at least mechanically.
- redtop s13 sr20det
- blitz FMIC
- Heavy throttle 3" DP
- Apex-i GT spec 3.75" exhaust
- Tomei 555 injectors (buying off jay aka 10secsorbust)
- s14 T28 ballbearing turbocharger
- Turbonetics deltagate
- TEIN coilover suspension
- KAAZ 1.5 way LSD
- NEX race buckets
- momo wheel
- 5 zigen fn1or wheels
- Lexan replacing hatch glass (some assfuck threw a battery through my rear window)
- z32 MAS
- Apex SAFC
- redtop s13 sr20det
- blitz FMIC
- Heavy throttle 3" DP
- Apex-i GT spec 3.75" exhaust
- Tomei 555 injectors (buying off jay aka 10secsorbust)
- s14 T28 ballbearing turbocharger
- Turbonetics deltagate
- TEIN coilover suspension
- KAAZ 1.5 way LSD
- NEX race buckets
- momo wheel
- 5 zigen fn1or wheels
- Lexan replacing hatch glass (some assfuck threw a battery through my rear window)
- z32 MAS
- Apex SAFC
-
KOUKIMONSTER
- 85% ricer
- Posts: 137
- Joined: April 04, 2004
- Location: orange Park, FL
- Contact:
Hi, names Brandon. I own a 1990 Nissan 240sx fastback 5-Speed. It is the base model with no wing, sunroof, or rear window wiper. Current mods are Injen Intake, APEXi N1 exhaust system, and last but not least TEIN He coilovers.
My plans are:
17" Volk GT-C wheels
BRIDE seats
TAKATA 4 point harnesses
180sx light conversion
OEM 180sx front bumper
SR swap
JDM rear end, with CUSCO LSD
Lots of performance parts
My plans are:
17" Volk GT-C wheels
BRIDE seats
TAKATA 4 point harnesses
180sx light conversion
OEM 180sx front bumper
SR swap
JDM rear end, with CUSCO LSD
Lots of performance parts
1990 240sx Fastback
Shift_CA_wheelspin
Shift_CA_wheelspin
-
getbo0stedsr
- 100% ricer
- Posts: 11
- Joined: October 05, 2004
- Contact:
my names chris but alll my friends call me nailor <last name> i just got a 93 240sx shell, a coupe by the way. I sold a 95 si hatchback for a s13 blacktop clip from flashoptions.com. In the meantime i ordered D2 36 way adj coilover kit. bride zeta II seats with no rails
, calsonic FMIC. After i get all this done i think im going to order some fuel shit probably tomei injectors , nismo fpr and some sort of fuel rail. And last but not least trying to get my hands on a Chargespeed kit for a desent price. But yeah my names chris and i just joined so nice to meet yall. 

