I'm excited to announce that thejdm is now updated to the latest phpbb 3.2 software. You may notice the site is now mobile friendly but with the upgrade comes some hiccups. theGarage, theGallery, theArcade are no longer supported. In due time the developers should be working to release the modifications to work on the new software. #LetsMakeForumsGreatAgain

BUSHING SUCK!

wheels. tires. brakes. stiff stuff.
Post Reply
BRYCE
Posts: 5323
Joined: January 18, 2004
Location: Twin Cities, MN
Contact:

BUSHING SUCK!

Post by BRYCE » August 12, 2004

Ok first off i am a total newb with suspention parts. Look i cant even spell it right. OK for the last month or so my cars front suspenion has been acting werd. I think its the ball joints but i could be wrong. When i hit the accel its like the whole front end shifts to the right and then when i let off it goes back into place. Also it has fucked up my 2 month old tire, which i waited to long to take off and put the steelies back on. But the thing is i dont really know where the ball joints are. I think that they are the ones cirlced in red but, i was also thinking it was the things in yellow?
Image OK so if you guys think that its the balljoints are they hard to take out and replace or do you think i should bring it in to a place and get them done? also are they expensive?

Here is what it has been doing to my tires. Can you tell which was on the back and which was on the front? ha i can
Image[/list]
AE86 Levin Coupe x SR20DET x Watanabe R-Type
Bryce

sfc
15% ricer
Posts: 685
Joined: November 11, 2003

Post by sfc » August 12, 2004

Ball joints are cheap. I think mine was like 10$ from napa, or less. You'll want to take it someplace that has a press though.
Image

BRYCE
Posts: 5323
Joined: January 18, 2004
Location: Twin Cities, MN
Contact:

Post by BRYCE » August 12, 2004

So i cant do it my self?

User avatar
munster
Posts: 10705
Joined: January 31, 2003
Location: Somewhere between Heaven and Hell.

Post by munster » August 12, 2004

You can do it yourself if you have the right tools. They're a bitch, though. Best to take it somewhere. They'll get it done in half the time you will.
Built Motorsportswear - Function/Form Autolife - ICB Motorsports
Go Autoworks
- K-Tuned - My friends

User avatar
Nikku
Posts: 2818
Joined: December 19, 2003
Location: 大阪
Contact:

Post by Nikku » August 12, 2004

the ball joints COULD be the culprit but that one did not look damaged, do me a favor and take a pic of the outer tie rod end on that side (the "ball joint that comes offa the steering rack).....could be an alignment issue, or numerous other things
Just call me Dr. Vice.

User avatar
kotomile
95% JDM
Posts: 4751
Joined: November 20, 2003
Location: Afghanistan
Contact:

Post by kotomile » August 12, 2004

Take it to a tire place and describe your problem. We get all kinds of broken tie rod ends, balljoints, wheel bearings, etc. where I work. The mechanics can diagnose the problem more quickly and since you need to have it replaced anyway, you might as well take it in now.

The tire - is the inner part worn totally smooth or does it have a "chop" (where it feels smooth rubbing one direction but rough in the other)?
Image
Image

BRYCE
Posts: 5323
Joined: January 18, 2004
Location: Twin Cities, MN
Contact:

Post by BRYCE » August 13, 2004

ok i took off the wheels again today and i found whats moving back and forth. Whats it called just a rubber bushing?
Image ??

phan
40% JDM
Posts: 1142
Joined: December 15, 2003
Location: los angeles
Contact:

Post by phan » August 14, 2004

that's the LCA bushing.

BRYCE
Posts: 5323
Joined: January 18, 2004
Location: Twin Cities, MN
Contact:

Post by BRYCE » August 14, 2004

ok thanks man

BRYCE
Posts: 5323
Joined: January 18, 2004
Location: Twin Cities, MN
Contact:

Post by BRYCE » August 18, 2004

Ha Bushing suck...

Post Reply