I'm excited to announce that thejdm is now updated to the latest phpbb 3.2 software. You may notice the site is now mobile friendly but with the upgrade comes some hiccups. theGarage, theGallery, theArcade are no longer supported. In due time the developers should be working to release the modifications to work on the new software. #LetsMakeForumsGreatAgain

wtf is wrong with my blazer?

general car and site related talk and chat.
Post Reply
sfc
15% ricer
Posts: 685
Joined: November 11, 2003

wtf is wrong with my blazer?

Post by sfc » December 06, 2004

Since robry sucks and can't help at all :) The thing just will NOT idle right now. I'm pretty sure this all started after I put some injector cleaner into it (it sat for 6 months I figured it'd probably be good to clean the injectors a bit). It's a 93 s10 blazer, 4dr 4wd. Anyways, the thing like idles like it's got some freak ass lobey (sp?) cam in it... just VWOOM *almost dies* VWOOM *almost dies* VWOOM. If I try and idle with it in gear it will die unless I keep the gas peddle pressed a bit. And if I'm accelerating at all it's smooth as hell... so basically it's only an idling problem... any ideas? It doesn't spit an engine code most of the time, although sometimes after driving for like half an hour it'll spit a SES (service engine soon). But as soon as I shut the truck off and restart it that's gone.
Image

User avatar
.saint
Administrator
Posts: 15964
Joined: January 31, 2003
Location: PA
Contact:

Post by .saint » December 06, 2004

maybe a vac. line? check the plugs and wires as well.
.saint, the honda EK parts jdMuseum.
i hope i grow to be half the man my grandfather was.
poop.hell sideways.brigade
http://www.fright.house

just teg'n it
70% ricer
Posts: 278
Joined: October 04, 2004
Location: Hamilton, Ontario, Canada

Post by just teg'n it » December 06, 2004

i'd say vacuum as well.

BRYCE
Posts: 5323
Joined: January 18, 2004
Location: Twin Cities, MN
Contact:

Post by BRYCE » December 06, 2004

ya vaccumm 95% of the time
AE86 Levin Coupe x SR20DET x Watanabe R-Type
Bryce

User avatar
tenchu
Posts: 5691
Joined: July 11, 2003
Location: Somewhere, Iraq
Contact:

Post by tenchu » December 06, 2004

Vaaacume lines :down:
Image
1993 RHD Impreza : Brembo : Zeal : Whiteline : Prodrive : Enkie : Cusco'd out

sfc
15% ricer
Posts: 685
Joined: November 11, 2003

Post by sfc » December 07, 2004

k, will check. The thing started running normal again last night too... I'll check though if it's being a biatch again tonight when I go to class.

just teg'n it
70% ricer
Posts: 278
Joined: October 04, 2004
Location: Hamilton, Ontario, Canada

Post by just teg'n it » December 07, 2004

damn small block chev's they are all the same :roll:

sfc
15% ricer
Posts: 685
Joined: November 11, 2003

Post by sfc » December 07, 2004

I dunno... it's at 200k miles, and other than this possible vacuum line it's got no issues. Doesn't burn any oil or anything... I'd say that's doing allright.

Bangin HB
90% ricer
Posts: 109
Joined: July 27, 2004
Location: Ft. Laud/Orlando, FL
Contact:

Post by Bangin HB » December 07, 2004

4.3 TBI? one thing that will really clean up the idle is changing the pcv valve. get some of that spray carb cleaner and a new valve. take old pcv off (side of TB), spray some carb cleaner in the soft line and into the tb (with engine running. small squirts at a time) then put your new valve on the line and stick into hole. wouldnt believe how much it helps, plus its cheap. before and after idle was like 2 dif engines.
Image
^clicky for the NEW all hatch community: e-hatch

Post Reply