99-00 civic coupe Koni/GC install write up?

Post by **Sean @ NDF** » November 02, 2005

I cant find one anywhere...even on honda-tech. Any body know of one?

Post by **kotomile** » November 02, 2005

99-00 is a fairly straightforward install isn't it?

idreamidrive · Post by **idreamidrive** » November 03, 2005

shouldn't they be on the inside of your packaging?

Post by **Sean @ NDF** » November 03, 2005

koni instructions are HOrrIBLE! and the GC didn't even come with instructions.

Yes koto, its pretty much a simple install. I just want to make sure I don't forget anything, and/or put things in the wrong spot.

I've installed full coilovers, and shock/spring combo's, but never a shock/sleeve.

Post by **Nikku** » November 03, 2005

http://www.honda-tech.com/zerothread?id=1416178

http://www.honda-tech.com/zerothread?id=1330796

http://www.honda-tech.com/zerothread?id=1212527

i pwn j00

Post by **Nikku** » November 03, 2005

http://www.honda-tech.com/zerothread?id=891136

again

Post by **Sean @ NDF** » November 03, 2005

I've seen all of those threads so NO you dont pwn anyone. Those are integras homie....

eh, it doesnt matter, I'll figure it out...

Post by **Nikku** » November 03, 2005

and you should well know that the integra suspenion is the same as civic suspension, what are you having problems with on it? it is the actual removal/install process? or what? be more specific so i can get you what you need sucka duck

Post by **Sean @ NDF** » November 03, 2005

what parts are needed and what arent. The Koni's come with hardware to install springs....you wont use the spring perch or the clipring for coilover sleeves...

and where the fuck the other shit goes on the top hat

Post by **Nikku** » November 03, 2005

you my friend need to look closer at the last link i posted, it shows you EXACTLY what to do with the perches, etc