http://hondamarketplace.com/zerothread?id=1631747i have a 1994 b16a3 del sol vtec motor for sale but has been modified to a type-r. here's the list of mods and parts that it will come with:
Block
-balanced and blueprinted bottom end
-ARP head studs
-block was rebuilt with all new bearings, seals, gaskets around 50k miles ago.
-oversized CTR pistons and rings installed with rebuild
-timing belt, oil pump, water pump have about the same mileage
Head
-will come with sotck gsr valve springs and retainers
-type-r intake manifold and b16 throttle body
-headgasket was just replaced no more than 6k miles ago
-will come complete
transmission
-the motor will come with a 96 gsr tranny, grinds a little in third gear
-clutchmasters stage 3 clutch with around 30k miles
-lightened stock flywheel (13lbs)
everything else
-swap comes wiring harness and skunk2 chipped p30 ecu
-motor can come with axles and shift linkage if you would like
-will also come with a pair of headers...a jdm dc 4-1 header (dented on the bottom) and a gold dc 4-2-1 header.
let me know if you have any questions...i will be happy to tell you anything about the motor you would like to know. this b16 put down 186 to the wheels after tuning with hondata. im asking 2500 for the swap, maybe a little extra if you want the axles and shift linkages, but we can work something out to your budget. thanks for reading.
call me at 951-533-5878, email me at [email protected], or myspace message me at http://www.myspace.com/mikefryer
Original Post right thur. If you have any questions and for some reason don't want to contact him, I'll be glad to answer any questions. He's willing to take offers. If you are looking for a b16, this is a good one! Has always run good!
