I'm excited to announce that thejdm is now updated to the latest phpbb 3.2 software. You may notice the site is now mobile friendly but with the upgrade comes some hiccups. theGarage, theGallery, theArcade are no longer supported. In due time the developers should be working to release the modifications to work on the new software. #LetsMakeForumsGreatAgain

Need a little help

engine. drivetrain. engine management & trouble codes talk.
Post Reply
Ek20A
90% ricer
Posts: 94
Joined: November 02, 2005
Location: Cuse. New York.

Need a little help

Post by Ek20A » May 31, 2006

Hey everyone i have a K20a going into my 96Ek hatch and i havnt been able to work on it in a while but i have finally been getting things going but i ran into a prob.. Im not getting any fuel, when you go to start the car, the power to the injectors go's away. There when the key is on, but gone when you try and start the car., Any ideas im thinking its a relay or i have got somthing crossed in the wiring.???? open for anything. Thanks.
Top
User avatar
munster
Posts: 10705
Joined: January 31, 2003
Location: Somewhere between Heaven and Hell.

Post by munster » May 31, 2006

I'm not familar with K swaps, but is there an immobilizer on Ks?
Built Motorsportswear - Function/Form Autolife - ICB Motorsports
Go Autoworks - K-Tuned - My friends
Top
Ek20A
90% ricer
Posts: 94
Joined: November 02, 2005
Location: Cuse. New York.

Post by Ek20A » May 31, 2006

Right on man, nahh there isnt on the typeR, thats just on the USDM Type S. The motor turns over real smooth and everything but im not sure if it went into a safegard mode or what so im gona try some more things. But more hel p the better
Top
User avatar
Sean @ NDF
Posts: 13082
Joined: January 24, 2005
Location: Narita-Yokohama
Contact:
Contact Sean @ NDF

Post by Sean @ NDF » May 31, 2006

no cel?
Top
hondalover
Posts: 67
Joined: February 24, 2006
Location: Maryland

Post by hondalover » June 01, 2006

IM pretty sure there is a immobilizer on the type r ecu also, but u can get rid of it by jumping two wires.
Top
User avatar
munster
Posts: 10705
Joined: January 31, 2003
Location: Somewhere between Heaven and Hell.

Post by munster » June 01, 2006

Once you figure it out...post it up. It'd be good information for future K swaps on here.
Top
Ek20A
90% ricer
Posts: 94
Joined: November 02, 2005
Location: Cuse. New York.

Post by Ek20A » June 01, 2006

No problom, will do still figuring some things out, Has anyone else done the swap on here?
Top
User avatar
munster
Posts: 10705
Joined: January 31, 2003
Location: Somewhere between Heaven and Hell.

Post by munster » June 01, 2006

Ek20A wrote:No problom, will do still figuring some things out, Has anyone else done the swap on here?
Hercules did a K24 into an EG.
Top
Ek20A
90% ricer
Posts: 94
Joined: November 02, 2005
Location: Cuse. New York.

Post by Ek20A » June 01, 2006

Yeah i just got done reading his whole 12 page, form on his swap i noticed he had some prob. with his spark,... I'll have to double check each coil.. But i was talkin to a guy today that said i should hook up a niod-light to it today (Test injectors).. The saga continues.. :eek: will not sleep till i figure this thing out.
Top
User avatar
Doctor H Mcm
55% ricer
Posts: 362
Joined: November 06, 2005
Location: Syracuse New York

Post by Doctor H Mcm » June 02, 2006

yo yo yo i just had the same problem on my car today no fuel in the motor i had the engine harness conectors switched aroung on my 92 eg with a prelude swap...yo give me a call sucka i will take alook at it test the injectors with an led testlight see if they pulse if not back trace it .........the h22 is alive its back for action.... :boxin:
H22a turbo 92 civic vx
Top
Post Reply

Return to “general tech”