POST WHORES UNITE!!!!!!!!!!!!!!!!!!!!!!!!!

[Jams_ek]

^yep did the same thing about a year ago to my place and yes hammer drills are the shit!

[77]

You can always apply for 3rd shift tele tech.

[77]

But Ma! I don't wanna go to school!
"You'll make twice as much money."
Ah kay.

[Secret Squirrel]

evap core in a new hyundai tucson...pays 2.2 hours to pull the dash and heater box and evac recharge a/c bleed coolant. ..fuck you hyundai warranty.

[tenchu]

evap core in a new hyundai tucson...pays 2.2 hours to pull the dash and heater box and evac recharge a/c bleed coolant. ..fuck you hyundai warranty.

Seems 90% of Hyundai times are BS. I've done a hand full of Santa Fe's, every single one needing LCAs, and every single one broke the welded nut off in one of the locations on the subframe. Pays 1.5hrs for both sides (iirc) and cutting into the subframe to remove the broken welded nut replacing, and re-welding the subframe definitely doesn't = 1.5hrs haha.

[tenchu]

i shall go talk to the junkyard soon to see about employment. hard to find time when refinishing a basement for a end of the month move in. it is taking long than expected. LOTS of learning experiences, like, hammer drills are awesome

If you do, will you keep an eye out for a 90-94 LS400 for me please?

[77]

Oh man, reading too many Canadian GT-R build threads.
Want to work on the car so bad.

[Secret Squirrel]

evap core in a new hyundai tucson...pays 2.2 hours to pull the dash and heater box and evac recharge a/c bleed coolant. ..fuck you hyundai warranty.

Seems 90% of Hyundai times are BS. I've done a hand full of Santa Fe's, every single one needing LCAs, and every single one broke the welded nut off in one of the locations on the subframe. Pays 1.5hrs for both sides (iirc) and cutting into the subframe to remove the broken welded nut replacing, and re-welding the subframe definitely doesn't = 1.5hrs haha.

ha yea there is a campaign for that...try doing the rear trailing arms on the santa fe 4wd. pays 1.5hrs and we have had guys fight those for half a day. same with the subframe. they pay us 2.7hrs to swap those out with allignment.

[idreamidrive]

i shall go talk to the junkyard soon to see about employment. hard to find time when refinishing a basement for a end of the month move in. it is taking long than expected. LOTS of learning experiences, like, hammer drills are awesome

If you do, will you keep an eye out for a 90-94 LS400 for me please?

will do, but found out they only pay $8.50 which i can make more doing the unemployment thing and cleaning cars on the side. I don't think I will be working at a junk yard

[tenchu]

evap core in a new hyundai tucson...pays 2.2 hours to pull the dash and heater box and evac recharge a/c bleed coolant. ..fuck you hyundai warranty.

Seems 90% of Hyundai times are BS. I've done a hand full of Santa Fe's, every single one needing LCAs, and every single one broke the welded nut off in one of the locations on the subframe. Pays 1.5hrs for both sides (iirc) and cutting into the subframe to remove the broken welded nut replacing, and re-welding the subframe definitely doesn't = 1.5hrs haha.

ha yea there is a campaign for that...try doing the rear trailing arms on the santa fe 4wd. pays 1.5hrs and we have had guys fight those for half a day. same with the subframe. they pay us 2.7hrs to swap those out with allignment.

Haha, after realizing that, at least it seems, EVERY Santa Fe needs front LCAs, and EVERY one breaks in the subframe, resulting in me getting fucked EVERY time, I try to stay away from them now. I take it you work FOR Hyundai? I work for Nissan so the only time I get a Hyundai is from the used car lot (trade in/auction car) so we wouldn't do/know about a recall/campaign. Then again, I don't think I would want to. Recall/warranty work always sucks on hours.