I'm excited to announce that thejdm is now updated to the latest phpbb 3.2 software. You may notice the site is now mobile friendly but with the upgrade comes some hiccups. theGarage, theGallery, theArcade are no longer supported. In due time the developers should be working to release the modifications to work on the new software. #LetsMakeForumsGreatAgain
wheels. tires. brakes. stiff stuff.
-
.saint
- Administrator
- Posts: 15964
- Joined: January 31, 2003
- Location: PA
-
Contact:
Post
by .saint » October 05, 2004
good luck.
.saint, the honda EK parts jdMuseum.
i hope i grow to be half the man my grandfather was.
poop.hell sideways.brigade
http://www.fright.house
-
robry
- 70% JDM
- Posts: 1369
- Joined: February 03, 2003
- Location: Johnstown
-
Contact:
Post
by robry » October 05, 2004
we just took my friends axle nut off his dodge 1500 pickup. He had a 10 ft breaker bar on it and it wouldnt budge. Just heat it with a torch, we used a propane torch and that worked. Just heat it up a bit and it should come off.
06' RSX-S Turbo | PTE SC6162S 417whp!
-
phan
- 40% JDM
- Posts: 1142
- Joined: December 15, 2003
- Location: los angeles
-
Contact:
Post
by phan » October 05, 2004
power tools own you! my impact gun makes quick jobs of axle changes...woohoo!
-
BRYCE
- Posts: 5323
- Joined: January 18, 2004
- Location: Twin Cities, MN
-
Contact:
Post
by BRYCE » October 05, 2004
alright good and bad news got that bitch off with some pb and a longer breaker. But i cant get the axel from the hub. i think i need a hub puller?? fuck i dont even now what i need.. blah enough for today i am going back out and putting it back together i got a hot date tonight!! **WINK WINK**
AE86 Levin Coupe x SR20DET x Watanabe R-Type
Bryce
-
phan
- 40% JDM
- Posts: 1142
- Joined: December 15, 2003
- Location: los angeles
-
Contact:
Post
by phan » October 05, 2004
gotta pull the lower ball joint out from the LCA first...this can be a bitch as well. once you do get it off, tho, you can push the axle out easily.
-
BRYCE
- Posts: 5323
- Joined: January 18, 2004
- Location: Twin Cities, MN
-
Contact:
Post
by BRYCE » October 05, 2004
Nope... hah i got the ball joint out of the LCA (pretty loose had to for bushing not even a month ago) so ya i dont know why its so tough??
-
phan
- 40% JDM
- Posts: 1142
- Joined: December 15, 2003
- Location: los angeles
-
Contact:
Post
by phan » October 05, 2004
ok, take a thin hammer or something and tap the axle out of the hub.
-
.saint
- Administrator
- Posts: 15964
- Joined: January 31, 2003
- Location: PA
-
Contact:
Post
by .saint » October 05, 2004
we need ban to start posting here again. he has a trick to getting the balljoint apart real quick.
-
ban
- 95% ricer
- Posts: 69
- Joined: August 11, 2003
- Location: johnstown
-
Contact:
Post
by ban » October 05, 2004
i'd like to give away my trick but i'm to stupid to explain it....sounds like u had no problem with it though... lie phan says all u need to do is tap the center of the axle shaft and it should slide out of the splines. if its rusted and doesn't wanna slide out squirt it with pb.. and get a bigger hammer...good luck
-
BRYCE
- Posts: 5323
- Joined: January 18, 2004
- Location: Twin Cities, MN
-
Contact:
Post
by BRYCE » October 05, 2004
So the threaded shaft that the axel nut was on, thats what i pound out?? Fuck i am soo close
